*mydirectindustry

Hose Sets

Product catalog summary

Mechanical Specifications
The hose sets are designed for potable water applications with an operating pressure of up to 150 psi at 122°F and a burst pressure of 750 psi. They are suitable for ambient temperatures ranging from 40°F to 122°F and media temperatures up to 122°F. The tube material is polyester reinforced polyethylene, and the gasket material is a thermoplastic elastomer. Brass fittings are made from lead-free brass with less than 0.25% lead, and there is an option for tin plating according to ASTM B545 standards. The product is NSF certified for select options.

Applications
These hose sets are applicable in coffee/espresso machines, vending equipment, ice maker equipment, water purification equipment, appliances, and other potable water applications.

Features
Key features include NSF certification on select options, lead-free brass fittings, multiple connection options, and customizable tube lengths.

Ordering Information
The minimum hose length is 6 inches, and lengths must be specified in whole inches. Various fittings are available, including female swivel fittings, male compression fittings, and garden hose thread fittings, each with options for no-lead brass and tin plating.

Standard Part Numbers
Examples of standard part numbers include configurations like DHSP-48-01-20, which specifies a 48-inch hose with a 90° elbow and a 5/8 - 18 UNF 45° flare fitting.

Catalog excerpts

Hose sets for potable water applications. HOSE SET Applications • Coffee/espresso machines • Vending equipment • Ice maker equipment • Water purification equipment • Appliances • Potable water applications Features • NSF certification on select options • Lead-free brass fittings (<0.25% Lead) • Multiple connection options • Tube length per your specifications SELECT CONFIGURATIONS Specifications subject to change without notice 1 of 3 Rev 05/18/11 ©2011 Deltrol Controls - A Division of Deltrol Corp. 2740 South 20th Street Milwaukee, WI 53215 USA 414.671.6800 | 414.671.6809 | www.deltrol-controls.com | [email protected]

Open the catalog to page 1

Deltrol CONTROLS Dimensional View Units: Inches [mm] Minimum Hose Length: 6 Inches Hose length must be whole inch Ordering Information DHSP - Tube length Fitting #1 Fitting #2 in whole inches Garden Hose Thread Fitting (3/4 - 11 1/2) • 01 = 90° Elbow No-Lead Brass • 02 = 90° Elbow No-Lead Brass with Tin Plating • 03 = Straight Fitting No-Lead Brass • 04 = Straight Fitting No-Lead Brass with Tin Plating Female Swivel Fitting • 20 = 5/8 - 18 UNF 45° Flare No-Lead Brass • 21 = 5/8 - 18 UNF 45° Flare No-Lead Brass with Tin Plating • 22 = 7/16 - 20 UNF 45° Flare No-Lead Brass • 23 = 7/16 - 20 UNF...

Open the catalog to page 2

eltrol CONTROLS Standard Part Numbers Part Number Specifications subject to change without notice 3 of 3 Rev 05/18/11 ©2011 Deltrol Controls - A Division of Deltrol Corp. 2740 South 20th Street Milwaukee, WI 53215 USA 414.671.6800 | 414.671.6809 | www.deltrol-controls.com | [email protected]

Open the catalog to page 3

All Deltrol Controls catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list