DSVP10N Dispense Valve

Product catalog summary

Overview: The DSVP10N is a 2-way, direct-acting, gravity-fed solenoid valve designed for dispensing water or similar media from a tank. It is suitable for applications such as hot and cold drink dispensers, tank or boiler draining, ice maker equipment, water purification equipment, and potable water applications.

Features: The valve is UR, cUR, and NSF certified, supports 18 inches water column head pressure, offers high flow capacity, and can have fixed or adjustable flow.

Electrical Specifications: The valve supports coil voltages of 24 VAC 60 Hz, 110/120, 220/240 VAC 50/60 Hz, and 12, 24, 36 VDC. It has a coil power of 11W continuous and 30W intermittent, with a duty cycle of 100% continuous or 9 seconds on, 13 seconds off intermittent. The coil is polyester encapsulated with Class F insulation and operates at an ambient temperature of 35º C.

Mechanical Specifications: The valve can handle water up to 99º C with polysulfone bodies and 77º C with nylon bodies. It operates at 0-18 inches water column pressure and can be mounted in any position between horizontal and facing up. The valve body materials are PSU (Polysulfone) and PA66 (Nylon), with a VMQ (Silicone) diaphragm.

Flow Data: The flow data is approximate and influenced by application variables, requiring user verification for specific applications.

Ordering Information: Non-standard configurations require specifying voltage, duty cycle, valve body material, flow adjuster, mounting bracket orientation, terminal orientation, coil spade terminal configuration, and head pressure. Standard configurations are available through distribution with specific part numbers for different voltage models.

Catalog excerpts

DSVP10N ©2011 Deltrol Controls - A Division of Deltrol Corp. 2740 South 20th Street Milwaukee, WI 53215 USA | P: 414.671.6800 | F: 414.671.6809 | www.deltrol-controls.com | [email protected] Specifications subject to change without notice 1 of 5 Rev 05/18/11 Deltrol CONTROLS DC DSVP10N DISPENSE VALVE 2-Way, direct-acting, gravity fed solenoid valve designed to dispense water or similar media from a tank. Applications • Hot & cold drink dispensers • Tank or boiler draining • Ice maker equipment • Water purification equipment • Potable water applications Features • UR, cUR, & NSF Cert. • 18 inches w.c. head pressure • High flow capacity • Fixed or adjustable flow Electrical Specifications Coil Voltages 24 VAC 60 Hz, 110/120, 220/240 VAC 50/60 Hz | 12, 24, 36 VDC Coil Power 11W Continuous | 30W Intermittent Coil Terminals 0.25” x 0.03” spade terminals Coil Rectification Not available Duty Cycle Cont = 100% | Int = 9 s on, 13 s off (min) Coil Treatment Polyester encapsulated Insulation Class Class F (155º C) Ambient Temperature 35º C Mechanical Specifications Media Water up to 99º C with Polysulfone bodies | 77º C with Nylon body Operating Pressure 0-18 inches water column (higher pressure available on request) Operating Position Any position between horizontal and facing up. Mounting Bracket Available in any 90º increment - see details on subsequent pages Inlet / Outlet Connections For Ø.625 ID tubing Vent Tube Option Not available Valve Body Material PSU - Polysulfone, PA66 - Nylon Diaphragm Material VMQ - Silicone Weight 14 oz. Agency Approvals UR, cUR, NSF

Open the catalog to page 1