2-Way, direct-acting, gravity fed solenoid valve designed to dispense water or similar media from a tank. Applications • Floor scrubbers • Tank or boiler draining • Not for potable water applications • For potable water applications see our DSVP10N Features • UR & cUR Cert. • 18 inches w.c. head pressure • High flow capacity • Fixed or adjustable flow VITON® is a registered trademark of DuPont Specifications subject to change without notice 1 of 5 Rev 05/18/11 ©2011 Deltrol Controls - A Division of Deltrol Corp. 2740 South 20th Street Milwaukee, WI 53215 USA | P: 414.671.6800 | F: 414.671.6809 | www.deltrol-controls.com | [email protected]

eltrol CONTROLS Dimensional View Units: Inches [mm] OPTIONAL FLOW ADJUSTER Mounting Bracket Orientation Options Front over inlet port Right of inlet port Back opposite of inlet port Specifications subject to change without notice 2 of 5 Rev 05/18/11 ©2011 Deltrol Controls - A Division of Deltrol Corp. 2740 South 20th Street Milwaukee, WI 53215 USA | P: 414.671.6800 | F: 414.671.6809 | www.deltrol-controls.com | [email protected]

Deltrol CONTROLS Flow data is approximate and will be affected by application variables. User must verify performance in their application. Flow * (Fluid Ounces per Second) Specifications subject to change without notice ©2011 Deltrol Controls - A Division of Deltrol Corp. 2740 South 20th Street Milwaukee, WI 53215 USA | P: 414.671.6800 | F: ­ 14.671.6809 | www.deltrol-controls.com‌| [email protected]

eltrolCONTROLS Ordering Information - Non-Standard Configurations (Minimum Quantities Apply) When ordering, please provide as much of the following information as possible to help specify the appropriate valve configuration for your application. If you require assistance, please contact a Deltrol Controls Sales Engineer: 2. What duty cycle do you require? • Intermittent (standard) • Continuous 3. What diaphragm material do you require • Viton® •Silicone 4. What valve body material do you require? • Nylon 5. Do you require a flow adjuster? (See Dimensional View on page 2) • No • Yes 6. How do...

eltrolCONTROLSOrdering Information - Standard Configurations The parts listed below are standard configurations that are typically available through distribution. Please contact your nearest Deltrol distributor for small volume pricing. Part Number • COIL TERMINATION: 0.25x0.03 TERMINALS (ORIENTED TO LEFT OF INLET PORT) • FIXED FLOW • INLET PORT: 00.69 WITH 00.77 BARB • OUTLET PORT: 00.69 WITH 00.77 BARB • VALVE BODY MATERIAL: PA66 - NYLON • DIAPHRAGM MATERIAL: FKM - VITON® • STANDARD MOUNTING BRACKET (ORIENTED TO RIGHT OF INLET PORT) • NO VENTTUBE Part Number VITON® is a registered trademark...