1. Catalogs
  2. Deltrol Controls
  3. D-22 D-Frame Solenoid

D-22 D-Frame Solenoid

D-22 D-Frame Solenoid

D-22 D-Frame Solenoid

Product catalog summary
Electrical Specifications
The D-Frame Solenoid offers a range of coil voltages including 6, 12, 24, 120, and 240 VAC, as well as 6, 12, 24, and 110 VDC. It supports continuous, intermittent, and pulse duty cycles with power ratings of 6.5 VA continuous, 8.5 VA intermittent, and 60 VA pulse for AC, and 4.2 Watts continuous, 9.6 Watts intermittent, and 40 Watts pulse for DC. The coil termination is standard with .110” quick connect terminals, with wire leads optional. The insulation class is rated at Class A, 105ºC (221ºF) max.
Mechanical Specifications
The solenoid measures 1.130” x 0.750” x 0.750” and features a plunger diameter of 0.250”. It is equipped with plastic plunger guide material and two #4-40 UNC-2B mounting holes. The total weight is 1.50 oz., with the plunger weighing 0.25 oz. The life expectancy is approximately 250,000 cycles, depending on load conditions.
Agency Approval
The solenoid has UL approval for continuous duty (File No. E57982) and insulation systems (File No. E74443).
Features
The solenoid is designed for a balance of cost and performance, available in both AC and DC models, with encapsulated coils on most models. Many models have UL approval.
Force Curves and Duty Cycles
The standard intermittent duty cycle is 25% with a maximum of 3 minutes "ON" and a minimum of 9 minutes "OFF". The standard pulse duty cycle is 10% with 100 milliseconds "ON" and 900 milliseconds "OFF". A heat sink of approximately 36 sq. in. is required.
Standard Part Numbers
The document lists various part numbers with corresponding voltage, duty cycle, power, resistance, and typical force at different strokes. Continuous, intermittent, and pulse duty cycles are detailed for both AC and DC voltages.
See more

Catalog excerpts

D-22 D-Frame Solenoid-1

D-22 iJ?Deltrol CONTROLS RoHS Comptant D-FRAME SOLENOID Two position linear solenoid with D-frame construction. Features Balance of cost and performance Օ AC solenoids and DC solenoids available Encբpsulated colis on most models ULapproval on many models Eloctrical Spթcifications Coil Voltages 6, 12, 24, 120, 240VAC|6,12,24, 110VDC Coil Power 6.5 VA Continuous, 8S VA Intermittent, 60 VA Puise 4.2 Watts Continuous, 9.6 Watts Intermittent, 40 Watts Puise Co-ITermination .110'quick connect terminais (standard) Wire leads optional wrth tape wrapped coil Duty Cycle Continuous, intermittent and puise duty available (see standard part numbers on page 4) Coil Treat ment Encpsulated (tape wrapped optional) InsulationClass Class A Rating - 105°C (221°F) Max. (standard) Dielectric Strength 30 Volts and Under.SOOVRMS Over 30 Volts: 1000 VRMS plus 2X rated voltage for 1 minute Mechanical Spcifications Size 1.130*(L)x0.750*(W)x075D*(H)(See page 2 fordimensional drawing) Forces See force curves on page 3 PlungerDiarneter 0.250* Plunger Guide Material Plastic Mounting 2X «4-40 UNC-2B Mounting Holes Weight Plunger-0.25oz^Total - 150oz. Life Expectancy 250,000 Cycles (D⩩pendent on load conditions) Agency Approval U L File No. E57982 For Continuous Duty UL Rie Na E74443 For Inflation Systems S105 Ail dimensions in Inches Spcifications subject to change without notice 1 of 4 Rev 07/19/11 32011 Deltrol Controls - A Division of Deitrol Corp. 2740 South 2CT Street Mihvaukee,WI 53215 USA | P: 414.671,6800 | F: 414.671.6809 | wvAV.deltrol-controlsxom | salesc&deltroLcom

 Open the catalog to page 1
D-22 D-Frame Solenoid-3

D-22 #Deltrol ^ CONTROLS Force Curves AC Continuous Duty - 6.5 VA DC Continuous Duty - 4.2 Watts itrokc in inchti ttrok* in inchtt AC Intermittent Duty - 8.5 VA DC Intermittent Duty - 9.6 Watts .2 J AC Puise Duty- 60 VA DC Puise Duty - 40 Watts 00% VOLTAGE » 7* OZ, D0H VOLTAOC FORCt * 2** C. HCLCING FORCt FORCE # !*> C. HOLDING FOftCf ■ 41 OZ FORCt «* C. HOLDING FOACf KOftCt V lOi* Ct HOLDING FORCE B5% VOI iftGt i I / OZ. 19% VOITAGC Օt3oz FOfiCC* 25* C, 100% VOLT A<»t- HOLDING FO«CF 4*OZ. FORCE Օ M* C. lus VOLTAOF HOLDING FORCE - 46 OZ. FO«Ct 105* C. 100% VOLTAGE-OiniNջtonct **OI FORCE 105*...

 Open the catalog to page 3

All Deltrol Controls catalogs and technical brochures

  1. DSVP40-S

    4  Pages

  2. DSVP10

    5  Pages

  3. Solenoids

    6  Pages

  4. Hose Sets

    3  Pages

  5. Relays

    6  Pages

  6. MED 20x2_0

    3  Pages

  7. DSVP16N

    3  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.