*mydirectindustry

Catalogs
Deltrol Controls
C-8 C-Frame Solenoid

C-8 C-Frame Solenoid

Product catalog summary

Electrical Specifications
The C-Frame Solenoid offers various coil voltages including 6, 12, 24, 120, and 240 VAC, as well as 6, 12, 24, and 110 VDC. Coil power is specified at 9.5 VA for continuous duty, 25 VA for intermittent duty, and 95 VA for pulse duty. The solenoid supports continuous, intermittent, and pulse duty cycles, with encapsulated coil treatment and Class A insulation rated at 105ºC (221ºF) maximum. Dielectric strength is 500 VRMS for voltages 30 and under, and 1000 VRMS plus twice the rated voltage for over 30 volts.

Mechanical Specifications
The solenoid measures 1.187” (L) x 1.280” (W) x 1.261” (H) with a plunger diameter of 0.375”. It features a plastic plunger guide and two #6-32 UNC-2B mounting holes. The plunger weighs 0.56 oz., and the total weight is 3.5 oz. The life expectancy is 250,000 cycles, depending on load conditions.

Agency Approvals
The solenoid has UL approvals for continuous duty (File No. E57982) and insulation systems (File No. E74443).

Features
The solenoid is economically constructed with options for AC and DC models, encapsulated coils, and UL approval on many models.

Force Curves and Duty Cycles
Standard intermittent duty cycle is 25% with a maximum of 3 minutes "ON" and 9 minutes "OFF". The pulse duty cycle is 10% with 100 milliseconds "ON" and 900 milliseconds "OFF". A heat sink of approximately 36 sq. in. is required.

Standard Part Numbers
The document lists various part numbers with specifications for voltage, duty cycle, power, resistance, and typical force at different strokes. Some items are normally stocked, while non-stocked items require a minimum order.

Catalog excerpts

C-8 Deltrol ^ CONTR C-FRAME SOLENOID Two position linear solenoid with C-frame construction. Features Economical construction Օ AC solenoids and DC solenoids available Encapsulated coils on most models Օ UL approval on many models Electrical Spcifications Coil Voltages 6, 12, 24, 120, 240 VAC | 6, 12, 24, 110 VDC Coil Power 9.5 VA Continuous, 25 VA Intermittent, 95 VA Pulse 6.5 Watts Continuous, 16 Watts Intermittent, 65 Watts Pulse Coil Termination .187" quick connect terminals (standard) .250" quick connect terminals (optional) Wire leads optional with tape wrapped coil Duty Cycle Continuous, intermittent and pulse (see standard part numbers on page 4) Coil Treatment Encapsulated (tape wrapped optional) Insulation Class Class A Rating - 105°C (221°F) Max Dielectric Strength 30 Volts and Under: 500 VRMS Over 30 Volts: 1000 VRMS plus 2X rated voltage for 1 minute Mechanical Specifications Size 1.187" (L) x 1.280" (W) x 1.261" (H) Forces See page 3 for force curves Plunger Diameter 0.375" Plunger Guide Material Plastic Mounting 2X #6-32 UNC-2B Mounting Holes Weight Plunger - 0.56 oz., Total - 3.5 oz. Life Expectancy 250,000 Cycles (Dependant on load conditions) Agency Approvals UL File No. E57982 For Continuous Duty UL File No. E74443 For Insulation Systems S105 All dimensions in Inches Specifications subject to change without notice 1 of 4 Rev 07/07/11 ©2011 Deltrol Controls - A Division of Deltrol Corp. 2740 South 20th Street Milwaukee, WI 53215 USA | P: 414.671.6800 | F: 414.671.6809 | www.deltrol-controls.com | [email protected]

Open the catalog to page 1

C-8 Deltrol CONTROLS Dimensional View Units: Inches [mm] 2x .187 x .020 [4.75x0.50] MALE Q.C./SOLDER TERMfNALS .625* .015 [15.9 ±.<] 2x .125 x .078 [1.98x3.18] SLOT .110±.oi5[2.8±.4]- h (.319 [8.1]) 288±.020 [7.3±.5] 1.675±.04o[42.5±i.o] .250±oi5[6.4±.4] 1.387±.020 [35.2±.5] ^~ MARKiNG ,657±.ois[16.7±.4]-l 0.375±-oo2 [9.5±.i] PLUNGER 2x 0.070* 002 [1.8±.'j 1.280±.oi5[32.5±.4] .905±.o30 [23.0±.b] .140 [3.6] MIN ,125±oio [3.2 ±-3]חI 2x 6-32 UNC - 2B TAP MTG. HOLES UNLESS OTHERWISE SPECIFIED INCHES ± .015 (MILLIMETERS 0.38) 1.000 [254] .340 ± ois [8.6± a] ^ h-ח 1.187±.015[30.1±.4]- .594±.015[15.1±.4]...

Open the catalog to page 2

C-8 Force Curves Deltrol CONTR AC Continuous Duty - 9.5 VA DC Continuous Duty - 6.5 Watts .2 -3 stroke in Inches ,2 .3 stroke in inches AC Intermittent Duty - 25 VA DC Intermittent Duty - 16 Watts i-1-1-1ח FORCE c<0 25" C, 100% VOLTAGE HOLDING FORCE = 90 OZ. FORCE 9 105* C, 100% VOLTAGE HOLDING FORCE = B5 OZ. FORCE 8> 25° C, 85% VOLTAGE HOLDING FORCE = 74 OZ. FORCE 3>105° C, 85% VOLTAGE HOLDING FORCE = 70 OZ. a 6E 4 .2 .3 stroke in inches .2 .3 stroke In Inches AC Pulse Duty - 95 VA DC Pulse Duty - 65 Watts ×I-1-1 FORCE <S 25" C, 100% VOLTAGE HOLDING FORCE = 134 OZ. FORC׉ ® 105» C, 100% VOLTAGE...

Open the catalog to page 3

C-8 C-Frame Solenoid

C-8 C-Frame Solenoid

Catalog excerpts

All Deltrol Controls catalogs and technical brochures