C-7 C-Frame Solenoid
4Pages

{{requestButtons}}

Catalog excerpts

C-7 C-Frame Solenoid - 1

C-7 Deltrol ^ CONTR C-FRAME SOLENOID Two position linear solenoid with C-frame construction. Features Economical construction Օ AC solenoids and DC solenoids available Encapsulated coils on most models Օ UL approval on many models Electrical Specifications Coil Voltages 6, 12, 24, 120, 240 VAC | 6,12, 24, 110 VDC Coil Power 7.8 VA Continuous, 21 VA Intermittent, 78 VA Pulse 5 Watts Continuous, 11.5 Watts Intermittent, 50 Watts Pulse Coil Termination .187 quick connect terminals (standard) Wire leads optional with tape wrapped coil Duty Cycle Continuous, intermittent and pulse (see standard part numbers on page 4) Coil Treatment Encapsulated (tape wrapped optional) Insulation Class Class A Rating - 105°C (221°F) Max. Dielectric Strength 30 Volts and Under: 500 VRMS Over 30 Volts: 1000 VRMS plus 2X rated voltage for 1 minute Mechanical Specifications Size 1.140" (L) 1.062" (W) 1.025" (H) Forces See page 3 for force curves Plunger Diameter 0.375" Plunger Guide Material Plastic Mounting 2X #10-32 UNF-2B Mounting Holes Weight Plunger - 0.56 oz., Total - 2.5 oz. Life Expectancy 250,000 Cycles (Dependent on load conditions) Agency Approvals UL File No. E57982 For Continuous Duty UL File No. E74443 For Insulation Systems S105 All dimensions in Inches Specifications subject to change without notice 1 of 4 Rev 07/07/11 ©2011 Deltrol Controls - A Division of Deltrol Corp. 2740 South 20th Street Milwaukee, WI 53215 USA | P: 414.671.6800 | F: 414.671.6809 | www.deltrol-controls.com | sales@deltrol.com

Open the catalog to page 1
C-7 C-Frame Solenoid - 2

C-7 Deltrol CONTROLS Dimensional View Units: Inches [mm] (247 [6.3]) MARKING 2X .187 X .020 [4.75 X 0.50] MALE Q.C./SOLDER TERMINALS 1 2X. 125 X.07811.98X3.181 SLOT 110±.015[2.8^."] .250* 015 [6.4±.j] 1.412±.e4o[35.9±t.o] 531 ■ . ■'. f 13.5- -M 2X0.070 ±-oo2 [1.8 ii] 0.375±.oo2 [9.5±i] PLUNGER 924±.030 [23.5±.s] 989±-ou [25.1 ±.t] 531 ±.ois [13.5±.4] 140 [3.6] MIN .750 [19.1] UNLESS OTHERWISE SPECIFIED INCHES ± .015 (MILLIMETERS 0.38) 125i.oio[3.2±.׮] ,570±.oi5 [14.5±.4] Specifications subject to change without notice 2 of 4 Rev 07/07/11 ©2011 Deltrol Controls - A Division of Deltrol Corp....

Open the catalog to page 2
C-7 C-Frame Solenoid - 3

C-7 Deltrol CONTR Force Curves AC Continuous Duty - 7.8 VA 14 c .25 io o c .20 S 151 *" a 4) ° O C o 6 c .10 ˣ u DC Continuous Duty - 5 Watts ■ FORCE @ 25« C, 100% VOLTAGE HOLDING FORCE = 42 OZ. ■FORCE 0 105» C, 100% VOLTAGE HOLDING FORCE = 37 OZ. ■FORCE® 25° C, 85% VOLTAGE HOLDING FORCE = 33 OZ. 1 FORCE @ 105* CL ' HOLDIN .05 .2 .3 stroke In Inches .2 ,3 stroke in inches AC Intermittent Duty - 21 VA FORCeVi 25° C, 100% VOLTAGE HOLDING FORCE = 66 OZ. FORCE @ 105» C, 100% VOLTAGE HOLDING FORCE = 61 OZ. DC Intermittent Duty - 11.5 Watts ■ i i i i i FORCE @ 25° C, 100% VOLTAGE HOLDING FORCE =...

Open the catalog to page 3

All Deltrol Controls catalogs and technical brochures

  1. DSVP40-S

    4 Pages

  2. DSVP10

    5 Pages

  3. Solenoids

    6 Pages

  4. Hose Sets

    3 Pages

  5. Relays

    6 Pages

  6. MED 20x2_0

    3 Pages

  7. DSVP16N

    3 Pages