*mydirectindustry

Catalogs
Deltrol Controls
C-6 C-Frame Solenoid

C-6 C-Frame Solenoid

Product catalog summary

Overview: The document provides technical specifications for Deltrol Controls' C-Frame Solenoid, a two-position linear solenoid with C-frame construction. It highlights features, electrical and mechanical specifications, agency approvals, and standard part numbers.

Features: The solenoid is noted for its economical construction, availability in both AC and DC models, and encapsulated coils in most models. Many models have UL approval.

Electrical Specifications:

Coil Voltages: Available in 6, 12, 24, 120, 240 VAC and 6, 12, 24, 110, 220 VDC.
Coil Power: Ranges from 6.8 VA continuous to 68 VA pulse for AC, and 4.7 Watts continuous to 45 Watts pulse for DC.
Coil Termination: Options include 0.187” and 0.250” Quick Connect/Solder Lug, and wire leads.
Duty Cycle: Continuous, intermittent, and pulse.
Coil Treatment: Encapsulated with insulation class options of Class A (105ºC) and Class F (155ºC).
Dielectric Strength: 500 VRMS for 30 volts and under, 1000 VRMS plus 2X rated voltage for over 30 volts.

Mechanical Specifications:

Size: 1.126” (L) x 0.860” (W) x 0.839” (H).
Plunger Diameter: 0.3125 inches.
Plunger Guide Material: Plastic.
Mounting: 4X #6-32 UNC-2B mounting holes.
Weight: Plunger - 0.317 oz., Total - 1.5 oz.
Life Expectancy: 250,000 cycles, dependent on load conditions.

Agency Approvals: UL File No. E57982 for continuous duty and UL File No. E74443 for insulation systems.

Force Curves: The document includes force curves for various duty cycles, indicating the performance of the solenoid under different electrical loads.

Standard Part Numbers: A detailed table lists part numbers, voltages, duty cycles, power, resistance, operation type, and typical force at various strokes. Some items are normally stocked, while non-stocked items require a minimum order.

Catalog excerpts

C-6 Deltrol ^ CONTR C-FRAME SOLENOID Two position linear solenoid with C-frame construction. Features Economical construction Օ AC solenoids and DC solenoids available Encapsulated coils on most models Օ UL approval on many models Electrical Spcifications Coil Voltages 6, 12, 24, 120, 240 VAC | 6, 12, 24, 110, 220 VDC Coil Power 6.8 VA Continuous, 19.6 VA Intermittent, 68 VA Pulse 4.7 Watts Continuous, 12 Watts Intermittent, 45 Watts Pulse Coil Termination 0.187" Quick Connect/Solder Lug (standard) 0.250" Quick Connect/Solder Lug (optional) Wire Leads (optional with tape wrapped coil) Duty Cycle Continuous, intermittent, pulse (see standard part numbers on page 4) Coil Treatment Encapsulated Insulation Class Class A Rating - 105°C (221°F) Max. (standard) Class F Rating - 155°C (266°F) Max. (optional) Dielectric Strength 30 Volts and Under: 500 VRMS Over 30 Volts: 1000 VRMS plus 2X rated voltage for 1 minute Mechanical Specifications Size 1.126" (L) 0.860" (W) 0.839" (H) (See dimensional drawing on page 2) Forces See force curves on page 3 Plunger Diameter 0.3125 Plunger Guide Material Plastic Mounting 4X #6-32 UNC-2B Mounting Holes Weight Plunger - 0.317 oz., Total - 1.5 oz. Life Expectancy 250,000 Cycles (Dependent on load conditions) Agency Approvals UL File No. E57982 For Continuous Duty UL File No. E74443 For Insulation Systems S105, S130, S130D, S130D1, S155D All dimensions in Inches Specifications subject to change without notice 1 of 4 Rev 07/07/11 ©2011 Deltrol Controls - A Division of Deltrol Corp. 2740 South 20th Street Milwaukee, WI 53215 USA | P: 414.671.6800 | F: 414.671.6809 | www.deltrol-controls.com | [email protected]

Open the catalog to page 1

C-6 Deltrol CONTR Force Curves AC Continuous Duty - 6.8 VA DC Continuous Duty - 4.7 Watts ~i-1-1 i i i FORCE ® 25° C, 100% VOLTAGE HOLDING FORCE - 33 OZ. FORCE @ 105° C, 100% VOLTAGE HOLDING FORCE = 28 02. FORCE <§> 25' C, 85% VOLTAGE HOLDING FORCE = 24 OZ. ■FORCE @ 105" C, 85% VOLTAGE HOLDING FORCE = 21 OZ. .05 ■ FORCE @ 25° C, 100% VOLTAGE HOLDING FORCE = 38 OZ. ■ FORCE® 25" C, 80% VOLTAGE HOLDING FORCE = 32 OZ. .-FORCE ® 105» C, 100% VOLTAGE HOLDING FORCE = 31 OZ. FORCE ® 105e C, 80% VOLTAGE HOLDING FORCE = 26 OZ. .2 .3 stroke in inches 2 .3 stroke in Inches AC Intermittent Duty - 19.6 VA...

Open the catalog to page 3

C-6 C-Frame Solenoid

C-6 C-Frame Solenoid

Catalog excerpts

All Deltrol Controls catalogs and technical brochures