*mydirectindustry

Catalogs
Deltrol Controls
C-4 C-Frame Solenoid

C-4 C-Frame Solenoid

Product catalog summary

Electrical Specifications
The C-frame solenoid offers a range of coil voltages including 6, 12, 24, 120, and 240 VAC, as well as 6, 12, 24, and 110 VDC. It supports continuous, intermittent, and pulse duty cycles with power ratings of 4.5 VA continuous, 12 VA intermittent, and 45 VA pulse for AC, and 3.5 Watts continuous, 8 Watts intermittent, and 35 Watts pulse for DC. The coil is tape wrapped and has an insulation class of A, rated at a maximum of 105ºC (221°F). Dielectric strength varies with voltage, with 500 VRMS for 30 volts and under, and 1000 VRMS plus twice the rated voltage for over 30 volts.

Mechanical Specifications
The solenoid measures 0.768” (L) x 0.687” (W) x 0.765” (H) and features a plunger diameter of 0.3125”. It is constructed with a plastic plunger guide and includes two #6-32 UNC-2B mounting holes. The plunger weighs 0.25 oz., with a total weight of 1 oz. The life expectancy is approximately 250,000 cycles, depending on load conditions.

Agency Approval
The solenoid has UL approval for continuous duty (File No. E57982) and insulation systems (File No. E74443 S105).

Features
The solenoid is designed with economical construction and is available in both AC and DC models. Most models feature tape-wrapped coils and have UL approval.

Force Curves
The document provides force curves for various duty cycles, including AC continuous duty at 4.5 VA, DC continuous duty at 3.5 Watts, DC intermittent duty at 8 Watts, and DC pulse duty at 35 Watts. The standard intermittent duty cycle is 25% with a maximum of 1 minute "ON" and 3 minutes "OFF". The standard pulse duty cycle is 10% with 100 milliseconds "ON" and 900 milliseconds "OFF".

Standard Part Numbers
The document lists standard part numbers with corresponding voltage, duty cycle, power, resistance, and typical force at various strokes. For example, part number 53645-80 operates at 6 VAC continuous duty with 4.5 VA power and a resistance of 3.7 Ohms, providing a pull force of 23 oz. at 0.000” stroke.

Catalog excerpts

C-4 # Deltrol ^ CONTROLS C-FRAME SOLENOID Two position linear solenoid with C-frame construction. Features Economical construction Օ AC solenoids and DC solenoids available Tape Wrapped coils on most models Օ UL approval on many models Electrical Spcifications Coil Voltages 6, 12, 24, 120, 240 VAC | 6, 12, 24, 110 VDC Coil Power 4.5 VA Continuous, 12 VA Intermittent, 45 VA Pulse 3.5 Watts Continuous, 8 Watts Intermittent, 35 Watts Pulse Coil Termination Wire leads 24 AWG Duty Cycle Continuous, Intermittent, Pulse (see standard part numbers on page 4) Coil Treatment Tape Wrapped Insulation Class Class A Rating - 105°C (221°F) Max. Dielectric Strength 30 Volts and Under: 500 VRMS Over 30 Volts: 1000 VRMS plus 2X rated voltage for 1 minute Mechanical Spcifications Size 0.768" (L) x 0.687" (W) x 0.765" (H) (See dimensional drawing on page 2) Forces See force curves on page 3 Plunger Diameter 0.3125" Plunger Guide Material Plastic Mounting 2X #6-32 UNC-2B Mounting Holes Weight Plunger - 0.25 oz., Total - 1 oz. Life Expectancy 250,000 Cycles (Dependent on load conditions) Agency Approval UL File No. E57982 For Continuous Duty UL File No. E74443 For Insulation Systems S105 All dimensions in Inches Specifications subject to change without notice 1 of 4 Rev 07/07/11 ©2011 Deltrol Controls - A Division of Deltrol Corp. 2740 South 20th Street Milwaukee, WI 53215 USA | P: 414.671.6800 | F: 414.671.6809 | www.deltrol-controls.com | [email protected]

Open the catalog to page 1

C-4 Force Curves Deltrol CONTR AC Continuous Duty - 4.5 VA DC Continuous Duty - 3.5 Watts T-1-1-1-1-1- ■FORCEE 25" C, 100% VOLTAGE HOLDING FORCE = 23 OZ. "FORCE 9 25° C, 85% VOLTAGE HOLDING FORCE = 20 OZ. FORCE 6> 105" C, 100% VOLTAGE HOLDING FORCE = 20 OZ. FORCE ® 105° C, 85% VOLTAGE HOLDING FORCE - 14 OZ. 08 T-1-1- FORCE <3> 25° C, 100% VOLTAGE HOLDING FORCE = 18 OZ. :FORCE® 25" C, 80% VOLTAGE HOLDING FORCE = 16 02. ■ FORCE <a 105" C, 100% VOLTAGE HOLDING FORCE = 15 OZ. ■FORCE ® 105° C, 80% VOLTAGE HOLDING FORCE = 12 OZ. .06՗ S E .04.5 .02; .2 .3 stroke in inches .2 .3 stroke in inches AC Intermittent...

Open the catalog to page 3

C-4 C-Frame Solenoid

C-4 C-Frame Solenoid

Catalog excerpts

All Deltrol Controls catalogs and technical brochures