WELD HOLE DETECTION Weld Hole Detector DTS240/EMR-M-400 Large field of detection Fast detection N o i n t e r f e r e n c e f r o m a m b i e n t light Adjustable Detection margin

Typical applications The DTS240 is an optical detector. In association with the EMR-M-400 emitter, it is able to detect the weld hole made in order to locate the linking weld between two strips. Main features • • • • High speed of the strip - up to 1500 m/min, Use of high power red LED for high detection margin and long life time, Interference suppression by modulated light, 2 models with high (DTS240) or low sensitivity (DTS241): the low sensitivity is recommended to avoid detection of small holes (defect) in the strip. • Adjustable detection margin with potentiometer on back panel, • Designed...

Technical Characteristics Receiver Line speed Weld hole diameter Detection field Distance Receiver – Emitter (1): DTS241 (low sensitivity) is recommended to avoid detection of small holes (defect) in the strip. Sensitivity adjustment may be required. DTS24• - S Transistor Output DTS24• - SR Isolated solid state relay output 2 complementary push-pull outputs, short circuit protection, Low impedance : 0/24 V - 100 mA max. 2 Optocoupled complementary Solid State Relay : Impedance : 50  Switching capacity +/- 350 V peak +/- 100 mA peak Single pole changeover Switching capacity : Electrical characteristics...

Technical Characteristics  Air Supply Ø 10  Optical axis  Connector clearance: min 120 mm  Mounting with 2 screws M6 or M10 Reference for order Receiver DTS24 • - •• •• Sensitivity 0: High Sensitivity 1: Low Sensitivity Output S: Transistor SR: Isolated solid state relay R: Relay 05/21– Printed in France © DELTA SAS 2021 Subject to change without prior notice