HOT METAL DETECTOR with Optical Fibr e High sensitivity : 300 °C High temperature optic Metallic sheath to protect the fibre Different fibre lengths / optics E 956 DELTA - 12 rue des Cigognes - 67960 ENTZHEIM - FRANCE - TEL : +33 388 78 21 01 - [email protected] - www.deltasensor.eu

Presen ta tion Presentation and operating principle The Stato-Sonde Z56 is a Hot Metal Detector for material at temperatures over 300 °C. Thanks to its optical fibre, it is able to detect products even in areas with high ambient temperature or in difficult areas due to physical obstructions, limited space, steam etc... Its rugged design enables the Stato-Sonde Z56 to withstand the very severe environmental conditions of the steel industry or rolling mills or continuous casting machine. The infrared radiation emitted by the hot product is collected by the optic, transmitted through the optical...

Outputs / Models © Minimum radius of optical fibre : - for Z56-• •-••/•F/« • : 80 mm - for Z56-* •-••/•G/* • : 180 mm © Air Supply 0 10 ® Water Supplies 0 10 @ Mounting with 2 screws M6 © Mounting with screw M10 © PG9 cable glands (2), for cable with diameter 7 - 10,5 mm ® Connector clearance 120 mm DELTA - 12 rue des Cigognes - 67960 ENTZHEIM - FRANCE - TEL : +33 388 78 21 01 - [email protected] -

Technical characteristics Reference for order Stato-Sonde Z56 - • • - •• /• •/• • ••• L=• Fibre Length Fibre protection Detection angle Terminal Block Static Relay Mounting stand & cooling jacket Connector with 2m cable Power input Cable length S Spot 4 4° 12 12° G Fibre with stainless steel sheath protection and air conduit Electronic Unit Example: Z56-JC-SR/5G/4CA 115-230V L=2: Z56 with mounting stand and cooling jacket, connector with 2m cable, Static Relay output, optical fibre length 5 m protected in metallic sheath, optic 4° in water cooling unit with air and additional hood/glass, power...