Catalogs >
DELTA >
Photodiode Array Detector DR3000

Photodiode Array Detector DR3000
4Pages

Catalog excerpts

Detection of small section product Detection regardless of the transverse position Design for extremely harsh environment

Open the catalog to page 1

Typical applications The receiver DR3000 is a linear photodiode array detector. In association with the EMR-C LED emitter, it is able to detect product with small section in a wide field, whatever the transverse position of this product. Detection of small bars on a wide table Detection of head / tail Presentation - Features The Detector DR3000 consists of a lens, a linear diode array and a processing unit enclosed in a cast aluminium case. The image of the viewed area is focused onto the diode array. The output of the Detector DR3000 switches when a product is seen within the field of view...

Open the catalog to page 2

Receiver DR3000 characteristics Response time Static output Indicator output 2 complementary static outputs 24 V 100 mA Single pole changeover: Switching capacity 550 VA with 250 V max, 5 A max Closing time: 7.5 ms, Opening time: 3 ms 0/24 V on the collector of a transistor. Load resistance of 2.2 kΩ to internal +24 V. 0 V when the monitoring system detects one of the following faults: power supply failure, absence of scanning on the photodiode array, internal temperature greater than 60 °C. 24 V when no fault is detected. Static output 24 V / 50 mA for external lamp indicator, 24 V when...

Open the catalog to page 3

Optical Center Mounting with screw Ø 12 Air Supply Ø 10 Water supplies Ø 10 Connector clearance 120 mm Note: The fixing plate can be mounted in different positions (bottom / side of the emitter). Emitter: EMR-C- •••• 115/230 VAC Supply voltage 230 VAC 115 VAC 10/20 – Printed in France © DELTA SAS 2020 Subject to change without prior notice

Open the catalog to page 4

Photodiode Array Detector DR3000 4Pages

Catalog excerpts

All DELTA catalogs and technical brochures

Photodiode Array Detector DR3000
4Pages