Catalog excerpts
Time of flight LASER DISTANCE MEASUREMENT Digital communication: Profibus-DP, Profinet, Ethernet Modbus-TCP, EtherNet/IP High temperature targets - Long range – High accuracy Easy setup and installation Design for steel industry conditions E 1460 DELTA - Aéroparc 2 - 12 rue des Cigognes - 67960 ENTZHEIM - FRANCE - TEL : +33 388 78 21 01 - info@deltasensor.eu - www.deltasensor.eu
Open the catalog to page 1Introduction The Dilas FT1800 is a digital, high performances, non-contact laser distance measurement or detection sensor. The target may be hot or cold, stationary or moving. Dilas FT1800 measures on all non-shiny surfaces. The operation of the Dilas FT1800 is based on time-of-flight measurement. The sensor calculates the distance of the target surface using the time of flight of visible laser light pulses. The measurement is delivered on an analogue output or on the digital communication. Presentation The Dilas FT1800 is an autonomous sensor mounted in compact aluminium housing, IP66. The...
Open the catalog to page 2• Fixed sampling time allows user to get a repeatable and fixed measuring time: the target needs to be always measurable within this fixed time to use this mode, otherwise some error code may appear. • Tracking mode: when the target is moving in the axis of the sensor, this mode is recommended and provides better results and refreshment time. • Detection mode is interesting for applications where product or background is not measurable within a fixed time. Instead of freezing the detection output and the measurement value like for other modes, the FT1800 in detection mode will release the...
Open the catalog to page 3Typical Applications Length & position measurement at furnace entry Strip loop control in furnace Static slab dimensions measurement Hot product position measurement Transportation cart position measurement Stop position control E 1460 DELTA - Aéroparc 2 - 12 rue des Cigognes - 67960 ENTZHEIM - FRANCE - TEL : +33 388 78 21 01 - info@deltasensor.eu - www.deltase
Open the catalog to page 4Technical Characteristics Beam divergence / Spot diameter Maximum target T° Measurement Range vs Surface - Black surface (6% remission) - Natural surface, grey (13% remission) - White matt surface (80% remission) Measuring accuracy (1) (resolution 0.1 mm) Auto Tracking Detection Fixed sampling Average Mode vs Measuring time Automatic, depending on surface. Typical: 0.25 – 0.5 sec 20 - 125 ms 300 - 600 ms 300 - 600 ms 300 - 600 ms (moving averaging x2 or x4) Target speed Max 4 m/s (Tracking mode) Laser Class 2 Laser Class 3R (1) At 1 sigma (statistic spread 68%) Accuracy can be deteriorated...
Open the catalog to page 5Technical Characteristics Connection Models with 4-20mA output: Models with 4-20mA output & communication protocol: Dimensions Models with 4-20mA output: Air supply Ø 10 mm Water supplies Ø 10 mm Connector clearance 120 mm Mounting with screw Ø 10 mm 2 cable glands (cable Ø from 7 to 10.5 mm) Optical axis Measurement Ref. Laser axis Models with 4-20mA output & communication protocol: DELTA - Aéroparc 2 - 12 rue des Cigognes - 67960 ENTZHEIM - FRANCE - TEL : +33 388 78 21 01 - info@deltasenso
Open the catalog to page 6Accessories For all models Description Heat shield to protect from direct radiation. Only compatible with Mounting stand & cooling jacket (FT18••-J•) Additional cooling plate Only compatible with Mounting stand & cooling jacket (FT18••-J•) For models with Modbus-TCP (FT18•4): Remote Display unit (connection to 1 or 2 sensors) For display on the operator pulpit for cut to length application for example, or in case the access to the sensor is difficult or dangerous. Display of sensor measurement, status and error code. Remote Display unit with 1 dimension static calculation (connection to 2...
Open the catalog to page 7For models Dilas FT18•2 (Profibus-DP) Description A side connector of Profibus cable: B side connector of Profibus cable: Male, M12, 5 pin B-coded, Straight Female, M12, 5 pin B-coded, Straight Termination resistor for Profibus (male connector M12, B-coded) For models with Ethernet protocols (Profinet, Modbus-TCP, EtherNet/IP) Description A side connector of Ethernet cable: Male, M12, 4 pin D-coded, Straight B side connector of Ethernet cable: Male, M12, 4 pin D-coded, Straight Reference for order Dilas F T 1 8 • • - • • ••• L = • ANA output / Communication 1 : 4-20 mA 2 : 4-20 mA +...
Open the catalog to page 8All DELTA catalogs and technical brochures
-
IRIS Z6500
4 Pages
-
Stato-Sonde Z56
4 Pages
-
DigiScan XD500
8 Pages
-
Dilas FT4200
4 Pages
-
Brochure
24 Pages
-
Stato-Sonde Z66
4 Pages
-
VFT1
4 Pages
-
Reflectors R
2 Pages
-
Optical Barrier V3
4 Pages
-
Laser Barrier V5
4 Pages
-
DigiScan XD4100
8 Pages
-
DL4000-N
8 Pages
-
Laser Barrier VL-VRG
4 Pages
-
Optical Barrier VE/VR
4 Pages
-
Cropvision CV3000
6 Pages
-
Rota-Sonde TS2006
6 Pages
-
Laser Barrier VLP21/VRH
4 Pages
-
Trilas TL
6 Pages
-
Stato-Sonde Z50
4 Pages
-
Rota-Sonde TS5500
6 Pages
-
Rota-Sonde DC4500
6 Pages
-
Rota-Sonde DC4500F
2 Pages
-
BR4000
2 Pages
-
Rota-Sonde DC2000
4 Pages