Stereoscopic Width Gauge Optional Industrial Network Protoco Easy installation and maintenance DELTA - Aeroparc 2 - 12 rue des Cigognes - 67960 ENTZHEIM - FRANCE - TEL : +33 388 78 21 01 - [email protected] - www.deltasensor.eu

The Stereoscopic Width Gauge DigiScan XD500, designed for installation above the strip in cold rolling mills and processing lines, is state-of-the-art technology for measuring the width and centerline of strip or plate. The stereoscopic arrangement permits high on-line accuracy despite material hop, tilt, lateral movement, and thickness variation. Main features • Advanced edge detection software and data capture processor to perform edge sensing in real-time, • Advanced stereo calibration taking into account lens distortion, with subpixel accuracy, • On line verification and standardization to...

The gauge has an integrated Web server and the connection to the gauge with any Web browser, from a PC or a tablet, gives an access to gauge measurement data and configuration parameters. Remote access is possible for diagnostic assistance. Connectivity The DigiScan XD500 with built in Ethernet connection, integrated digital inputs / outputs and analogue outputs has a very flexible communication architecture and can easily be connected into any automation system. - Integrated Modbus TCP protocol, - Optional Profinet, Profibus-DP or EtherNet/IP protocol. Web browser (PC, tablet...) for measurement...

Calibration Two-dimensional calibration is performed prior to delivery by placing a calibration fixture at several positions. Calibration is accomplished by collecting camera pixel data at these referenced positions and then the stereo optical parameters are estimated. The width gauge is delivered calibrated in our factory. The installation ’s position is not critical as the stereoscopic cameras will compensate for any variation in the distance between the strip and the gauge. Verification of accuracy and standardization The DigiScan XD500 can be supplied with an active verification fixture,...

Technical characteristics XD500 characteristics For special application: strip size, mounting height, installation constraints, ...: contact us. Back light (Dark mode) DELTA - Aeroparc 2 - 12 rue des Cigognes - 67960 ENTZHEIM - FRANCE - TEL : +33 388 78 21 01 - [email protected] - www.deltasensor.eu

Technical characteristics Protocol DELTA - Aeroparc 2 - 12 rue des Cigognes - 67960 ENTZHEIM - FRANCE - TEL : +33 388 78 21 01 - [email protected] - www.deltasensor.eu

METALLIC BRAID FEMALE CONNECTOR CABLE SIDE © Connector clearance 140 mm © 4x slots 0 9 x 40 for mounting with screw 0 8© Reference for Stand-off distance © Slots centre axis position emr-c DELTA - Aeroparc 2 - 12 rue des Cigognes - 67960 ENTZHEIM - FRANCE - TEL : +33 388 78 21 01 - [email protected] - www.deltasensor.eu

Accuracy S: Standard H: High accuracy Accessories and Options • 3 axis adjustment mounting stand (ref: 7894240) Junction box, with Ethernet switch and 7” panel display Dimensions: 300 x 300 x 190 mm Active verification fixture, battery powered Power and I/O cable for XD500, with protective metallic braid: Power and I/O cable for EMR, with protective metallic braid: Cables for Ethernet, 2x Male D-coded M12 connectors, with protective metallic braid: Cables for Profibus-DP, Male / Female B-coded M12 connectors, with protective metallic braid 5 m (ref: 7540290), 8 m (ref: 7540248), 10 m (ref: 7540298),...