NEW IDEAS IN MOTION CONTROL... Accessory 8D (ACC-8D) Option 4A is a standalone printed circuit board amplifier that typically is connected to PMAC via ACC-8D (the Terminal Block board), although it can be wired without the Terminal Block board as well. This general-purpose amplifier provides four channels of 150W continuous (250W intermittent for 1 second) linear amplifiers. This amplifier may be used to drive small to medium size DC motors or proportional hydraulic valve actuators. This amplifier is very compact in size, and may be interfaced conveniently to PMAC through ACC-8D and through a 16-pin flat cable. It receives four ±10VDC analog control signals and four digital amplifier enable signals, and outputs four amplifier fault signals. It has four mounting holes on its circuit board for easy mounting. HARDWARE FEATURES Amplifier Output Current Ratings 1.0 A Continuous/2.0 A Peak Output Power Ratings 0.040 kW (0.054 HP) at 30 VDC

DC Brush Piezoelectric Galvanometer Voice Coil Hydraulic Hardware Features 4 independent analog amplifier channels each receiving a ±10VDC control signal Versatile, standalone, panel-mount circuit board form factor One digital input for the amplifier enable signal on each channel 30 VDC bus voltage One digital amplifier fault output signal per channel ACC-8D Opt 4 Options Chart This Product Requires No Accessories Development Software PMAC Executive Pro2 Suite CNC Software PMAC-NC Pro2 Runtime Tools and Libraries Power PMAC Communication library Tools and Libraries...

CNC Software PMAC-NC Pro2 Designer Tools and Libraries PMAC HMI Pro2 Runtime Development Software Power PMAC IDE ACC-8D OPTION 4 - 40W Four Channel Linear Amplifier Board ACC-8D OPTION 4A - 150W Four Channel PWM Amplifier Board