Delta Regis Catalog 2019
32Pages

• Brushless Electric Screwdrivers • Torque Testers • Screw Feeders • Tool Supports

WARRANTY Delta Regis products are warranted for one year from the date of purchase against defects in material and workmanship. In addition, DC premium brushless screwdrivers are warranted for two years and DC brushless motors are warranted for three years from the date of purchase against defects in material and workmanship. This warranty does not cover damage due to transportation, abuse, misuse, alteration, or improper service. Items subject to wear during normal use (such as tool cables, carbon brushes, driver bits, etc) are considered maintenance items and are not normally covered by...

INDEX INFORMATION WARRANTY DRIVER SELECTION GUIDE & FEATURES TORQUE CONVERSION TABLE ELECTRIC SCREWDRIVERS & CONTROLLERS 12V MINI (0.07–3.08 in-lbs) 32V INLINE (0.2–26.0 in-lbs) 32V ANGLE (0.9–18.2 in-lbs) 32V CONTROLLERS, ACCESSORIES 40V INLINE (8.9–443 in-lbs) 40V ANGLE (8.9–195 in-lbs) 40V PISTOL (2.7–159 in-lbs) 40V CONTROLLERS, ACCESSORIES COUNTING CONTROLLERS SLOW START & I/O MODULES 120V INLINE / ANGLE (1.33–21.7 in-lbs) SCREW FEEDERS, TORQUE TESTERS, ACCESSORIES SCREW FEEDERS, 1.0–5.2 MM THREAD DIAMETER MANUAL TORQUE DRIVERS, PRESET AND ADJUSTABLE DRTQ TORQUE TESTERS, 1 IN-LB–100...

6945 LTC Parkway, Port St. Lucie, FL 34986 ( 772.465.4302 www.deltaregis.com sales@deltaregis.com

TORQUE CONVERSION TABLE (row * cell = column) 6945 LTC Parkway, Port St. Lucie, FL 34986 www.deltaregis.com sales@deltaregis.com

SCREWDRIVER SELECTION GUIDE Know Your Assembly Requirements With the endless range of applications for installing threaded fasteners, proper selection of a screwdriver begins with knowing the details of the job that needs to be performed by the driver. Torque — What is the required torque to properly install the fastener? This torque value is determined through the engineering and testing of the product being assembled and not something that we can provide for you. How critical is the final torque value? Prevailing Torque — Is the fastener running down freely into a threaded hole, or is it...

SCREWDRIVER FEATURES Torque Repeatability — Delta Regis Electric Drivers utilize precise clutches for repeatable performance. Each 32VDC and 120VAC driver is tested at mid-scale for repeatability within ±3%. 12VDC and 40VDC drivers are tested for repeatability of ±5% or better. Please note that these are factory test values and that actual repeatability is joint dependent. It will vary based on factors such as joint type and consistency, lubrication, speed, operator input, and test equipment. Suspension bail allows for hanging tool from tool balancer for improved ergonomics and tool life....

0.07-3.08 in-lbs (0.01-0.343 Nm) The Delta Regis ESL2 Series Miniature Shut-Off Screwdriver provides excellent low torque repeatability in a small package for precise installation of small screws. The screwdriver's brushless 12VDC motor ensures durability and low maintenance. Each tool includes a 2m cable for connecting to the required BECT200 Controller. Compact size designed for installing miniature fasteners. Ideal for assembly of cell phones and other small electronics Precise shut-off clutch provides excellent repeatability • Torque range of 0.07-3.08 in-lbs (0.01-0.34 Nm) • Low speed...

The Delta Regis CESL8 Series Premium Brushless Screwdrivers provide the ultimate combination of ergonomics, precision, performance and environmental cleanliness to the installation of fasteners. The quiet, brushless DC motor does not create the carbon dust generated by the brushes in a conventional DC motor, and its low power consumption results in a tool that runs cooler, even under demanding applications. The CESL8 Series 32VDC Brushless Screwdriver can be used with either the standard BECT620N/820N Hi/Lo Speed Controller or with our BECT832N-SSO FASTEN/COUNT/VERIFY Controller for...

Model Number (Standard Housing) CESL824-ESD/RA Right Angle Driver \ ■. Dimensions (mm) 6945 LTC Parkway, Port St. Lucie, FL 34986 ( 772.465.4302 10 www.deltaregis.com sales@deltaregis.com

The BECT620N/820N Controllers are specifically for use with CESL810-827 Brushless Tools. One controller (ordered separately) is required per screwdriver. CE/RoHS/ETL Approved. *Part number with North American cordset—Add suffix E for EU cord, or suffix ‘UK’ for UK cord. Accessories Select driver model number on the right, follow column down the chart; X signifies an appropriate accessory. 6945 LTC Parkway, Port St. Lucie, FL 34986 ( 772.465.4302 11 www.deltaregis.com sales@deltaregis.com

Delta Regis 40VDC Premium Brushless Screwdrivers pack the performance to satisfy demanding assembly applications.With brushless motor technology that withstands higher duty cycles, these drivers are ready to perform on production lines typically dependent on pneumatic tools. As with all Delta Regis Shut-off Clutch Screwdrivers, excellent torque repeatability is the fundamental building block that defines these models. A host of screwdriver configurations, accessories and control options are available to make the 40VDC Series an ideal choice for production assembly across a wide range of...

Delta Regis CESL9 Series Screwdrivers are engineered to perform in tough applications. The slim design and threaded metal front end make it an ideal choice for fixture mount and auto-screwfeed applications. A powerful motor and integrated fan keep the driver running cooler, particularly on soft joint and higher cycle applications. 40VDC Series drivers are capable of developing high torques. These drivers must be used with the included side handle attachment or mounted in a torque reaction arm for operator safety. • Clean, powerful 40V brushless motor technology • Integrated fan keeps the...

HIGH TORQUE PREMIUM BRUSHLESS, SHUT-OFF CLUTCH CESLT8_M Series Screwdrivers incorporate an aluminum front collar to facilitate fixture mounting and each driver includes an accessory side handle for handheld applications. 40VDC Series drivers are capable of developing high torques. These drivers must be used with the included side handle attachment or mounted in a torque reaction arm for operator safety. Clean, powerful 40V brushless motor technology 1/4" hex drive Dependable, long lifespan Lever and push start versions available, forward/reverse switch Optional ESD-safe housing available...