- Catalogs
- Delta-Q Technologies
- Quiqdci
- Products
- Catalogs
- News & Trends
- Exhibitions
Quiqdci
Quiqdci
- Integrated high-frequency charger and DC-DC converter designed to power on-board accessories, saving space, weight, and reducing costs related to inventory, installation, and servicing.
- Advanced power electronics ensure high efficiency and unity power factor, meeting CEC energy efficiency standards and reducing electricity costs.
- Wide AC input voltage range allows operation on any single-phase grid worldwide.
- QuiQTM optimized charging profiles for various industrial battery brands and types, extending battery life and minimizing charge times with auto-recharge for low voltage/storage.
- Battery maintenance tools include integrated charge cycle and event tracking.
- Fully sealed enclosure protects against high vibration, extreme temperatures, and ingress of water, chemicals, and dust.
- Battery temperature monitor and multi-color LED indicator for charge status and faults.
- Field programmable with up to 10 QuiQ charging profiles and charge/event data downloadable using QuiQ Programmer.
- Dimensions: 28.0 x 24.6 x 11.0 cm (11 x 9.7 x 4.3 inches), Weight: < 6 kg (<13 lbs).
- Safety: UL approved to UL1564 3rd Ed., CSA 107.2, EN 60335-2-29, designed to meet UL2202 1st Ed.
- Emissions: FCC Part 15 / ICES 003 Class A, EN 55011.
- Immunity: EN 61000-3-2, EN 61000-3-3, EN61000-4-2/-3/-4/-5/-6/-11.
- Nominal DC output voltages: 48 V, 72 V, 96 V with maximum DC output power of 1000 W (945 W for 96 V).
- Battery types supported: Lead acid (Wet/AGM/GEL), lithium-ion.
- Protection features include electronic reverse polarity protection with auto-reset and electronic current limit for short circuits.
- No-load power draw: < 0.7 W for 48 V and 72 V, < 0.9 W for 96 V.
- Continuous/peak output current: 30 A / 60 A.
- Enclosure rating: IP66 (NEMA4).
- Operating temperature range: -30°C to +50°C (-22°F to 122°F), with derating above 30°C (86°F) and below 0°C (32°F).
- Storage temperature range: -40°C to +70°C (-40°F to 158°F).
- AC input voltage range: 85-265 VAC, nominal voltages: 120 VAC / 230 VAC rms.
- AC input frequency: 45-65 Hz.
- Maximum/nominal AC input current: 12 A / 9.5 A @120 VAC; 5 A rms @230 VAC.
- Nominal AC power factor: >0.99 @ 120 VAC / >0.98 @ 230 VAC.
Catalog excerpts
1kW Industrial Battery Charger / DC-DC Converter Key Features Integrated high frequency charger / DC-DC converter Built-in converter to power on-board accessories Saves space, weight and cabling Saves money on inventory / installation / servicing Advanced power electronics provide high efficiency and unity power factor Meets CEC energy efficiency standards Reduced electricity costs Wide AC input voltage range Operates on any single-phase grid worldwide QuiQTM optimized charging profiles for all popular industrial battery brands and types Extend battery life and minimize charge times Auto-recharge for low voltage / storage ensures equipment is ready for use Battery maintenance tools Integrated charge cycle and event tracking Fully sealed enclosure Protected against high vibration, extreme ambient temperatures and water, chemical and dust ingress
Open the catalog to page 1
-dci Specifications Charger DC Output Maximum DC output voltage Maximum DC output current Maximum DC output power Deep discharge recovery (minimum voltage) Maximum interlock current Nominal DC output voltage Battery type Lead acid (Wet / AGM / GEL), lithium ion Reverse polarity Electronic protection with auto-reset Short circuit Electronic current limit No-load power draw Battery DC input voltage range Continuous / peak output current Output lines Switched, direct (unswitched) Battery temperature monitor Multi-color LED indicator for >80% charge, full charge, fault Field programmable...
Open the catalog to page 2
