LADDER STABILIZER SYSTEM

Product catalog summary

Overview
Delta Prevention's ladder stabilizer system is designed to ensure safe access to roofs using an extension ladder. It is a versatile, patented system that can be installed quickly without anchoring on flat roofs, with or without a parapet.

Features

100% non-penetrating installation
Suitable for roofs with or without parapet
Constructed from lightweight, rust-resistant aluminum pipes
Steel stabilizer with anti-corrosion powder coating
Quick and easy installation
Patent pending
Can be installed permanently or temporarily
Made in Canada

Technical Specifications

Overall length: 145" (can be trimmed to a minimum of 85")
Height: 42"
Inside width - entrance: 23"
Inside width - exit: 28"
Parapet maximum width: 12"
Parapet maximum height: 24" (contact customer service for higher parapets)
Parapet minimum height: 6"
Material - parapet clamp: Powder coated steel with e-coat
Material - guardrail: Anodized aluminum
Total weight: 337.5 lb

Counterweights

CPA20002: 100 lb, dimensions 24” x 18” x 6”
BAA13-01 only: 50 lb, dimensions 24” x 18” x 6”, material: recycled rubber
EAA05-01 only: 50 lb, dimensions 17.25” x 17.25” x 8.35”, material: hot dipped galvanized cast iron with glued 0.120" (3 mm) EPDM membrane

Ladder Compatibility

Compatible with aluminum and fiberglass ladders
Compatible with round and "D" shaped rungs
Maximum rung diameter: 2"
Minimum inside width: 12"
Maximum side rail width: 4"

Additional Features

Self-closing safety gate (Item: GAT24A02, Material: Aluminum)
Adjustable clamp and adjustment screw for precise installation on parapets
Clamp can serve as a support point on roofs without a parapet wall

Catalog excerpts

LADDER STABILIZER SYSTEM Delta Prevention’s ladder stabilizer system is designed to create safe access to roofs accessible by an extension ladder. The versatile and patented system can be installed without anchoring in a few minutes on flat roofs with or without a parapet. FEATURES ▪ 100% non-penetrating ▪ For roofs with or without parapet ▪ Lightweight, rust resistant aluminum pipes ▪ Steel stabilizer with anti-corrosion powder coating ▪ Quick and easy installation ▪ Patent Pending ▪ Permanent or temporary installation ▪ Made in Canada Hooks compatible with ladders with round or "D" rungs up to 2" in diameter. This design allows the ladder to be hung from any angle and prevents accumulations of snow or ice. The parapet clamp provides unparalleled stability and adjustment for installations on roof with parapet. The extensions provide a solid grip and the guardrails lead the worker towards the center of the roof.

Open the catalog to page 1

LADDER STABILIZER SYSTEM ITEM # LADPT101 Ladder Stabilizer System The adjustable clamp and adjustment screw allow precise installation on the parapet. The clamp turns into a support point on roofs without a parapet wall. ACCESSORIES Self-closing safety gate # ITEM: GAT24A02 Material: Aluminum

Open the catalog to page 2

LADDER STABILIZER SYSTEM

LADDER STABILIZER SYSTEM

Catalog excerpts

All Delta Prevention catalogs and technical brochures