Product Data Sheet December 2019 BP2462, Rev AC Mobrey™ Hydratect 2462 Steam/Water Detection System High reliability system for water detection in steam lines Commonly used on steam drums, drain pots, or for steam Turbine Water Induction Protection (TWIP). Relay outputs in varying options, for status and fau

Hydratect 2462 Steam / Water Detection System The Hydratect electronic water and steam detection system is designed as an electronic alternative to conventional water level switches for steam raising plant. It can be used in a wide variety of situations wherever the detection of water or steam is vital for safe and efficient plant operation. The Hydratect 2462 control unit provides signal processing for two electrodes. Each channel monitors the status of its associated electrode. Four conductors are used between the control unit and each electrode so it can differentiate between steam, water,...

Hydratect 2462 Ordering Information A Hydratect 2462 steam/water detection system comprises: Control unit (see Table 1 on page 3) Two electrodes, two shrouded inserts, and two covers (see Table 2 on page 3) Anti Seize compound for electrode installation (see Table 2 on page 3) Two electrode cables (see Table 3 on page 4) Manifold, if user is not mounting electrodes in own manifold or pipework (see Table 3 on page 4) Specification and selection of product materials, options, or components must be made by the purchaser of the equipment. See page 5 for more information on Material Selection. Table...

Table 3. Hydratect Electrode Cables Ordering Information Product Description 10 ft. (3 m) multi-core electrode cable 33 ft. (10 m) multi-core electrode cable 60 ft. (18 m) multi-core electrode cable 98 ft. (30 m) multi-core electrode cable One cable is required for each electrode.

Specifications Material selection Delta Mobrey provides a variety of products with various product options and configurations including materials of construction that can be expected to perform well in a wide range of applications. The product information presented is intended as a guide for the purchaser to make an appropriate selection for the application. It is the purchaser’s sole responsibility to make a careful analysis of all process parameters (such as all chemical components, temperature, pressure, flow rate, abrasives, contaminants, etc.), when specifying product, materials, options...

Dimensional Drawings Hydratect enclosure Dimensions are in mm. 229 215 196 190 M6 Ground Stud Outline of front panel Overall depth = 100 mm (case and panel) + 3 mm (bracket) + 4.5 mm (bolt heads and washers)

Product Data Sheet Head Office Delta Mobrey Limited Riverside Business Park, Dogflud Way, Farnham, GU9 7SS, UK +44 (0)1252 729140 +44 (0)1252 729168 [email protected] Standard Terms and Conditions of Sale can be found at: www.delta-mobrey.com Mobrey is a trademark of Delta Mobrey Ltd. All other marks are the property of their respective owners. © 2019 Delta Mobrey Ltd. All rights reserved.