Technical Datasheet D-Series Flanged Seals with Flush Diaphragm Remote connection with: smart and analog pressure and differential pressure transmitters DIN 2512 Form N standard contact face (DN50 PN40) Length of cover: 54 mm for capillary £ 3 m 84 mm for capillary > 3 m Capillary from 1 to 3 m (special versions up to 6 m) Direct connection with: smart and analog pressure and differential pressure transmitters

Application The diaphragm seal is a pressure transmitting, diaphragm-type device. The pressure signal is sent to the cooperating pressure measuring device (pressure transmitter, pressure gauge) through manometric liquid filling the space between the separating diaphragm of the seal and the pressure measuring device. The diaphragm seal task is to isolate the pressure measuring device from damaging impacts caused by either medium or installation: s Low or high temperature, increased viscosity, and impurities s Vibrations of the installation (remote diaphragm seal) Measuring Ranges Recommended minimum...

Diaphragm seal version Capillary length Type of manometric liquid – DC (high-temperature), AK (low-temperature) Example: DPCE-28 pressure transmitter, EEx version, measuring range 0 ÷ 1 bar, cable connection, direct flanged seal with flush diaphragm DPCE-28 / EEx / 0 ÷ 1 bar / PK /

In the interest of development and improvement Delta Controls Ltd, reserves the right to amend, without notice, details contained in this publication. No legal liability will be accepted by Delta Controls Ltd for any errors, omissions or amendme nts. Delta Controls Limited Island Farm Avenue, West Molesey, Surrey KT8 2UZ, UK. T+44 (0)20 8939 3500 F+44 (0)20 8783 1163 E [email protected] W www.delta-controls.com