Adjustable line length Green, Red or Blue color Powerful laser projector for the projection of road markings in the industry. Delta FM Series is a laser system for line projection with multifunctional industrial applications. It is easy to install and adjust, with the capability to adjust the length of the projection line and to adjust the line thickness in advance. The Delta FM Series is classified as a 3R laser class. It is ideal for industrial applications that require a sufficiently powerful laser to project bright lines over long distances. It is safe enough so special safety goggles are not needed. Delta Field Master Series is available in Green color 520-530nm, Red color 638nm, Blue color 445nm. • Protection rating IP65 • Installation in the open or inside building. • Solid enclosure • Bright and saturated line • Easy to install • Precise mount, rotatable at 360° • Temperature regulation of the fans • Replacement of traditional zones or painted paths • Creation of lines in applications where tape or paint do not work (dusty, cold, dirty work areas) • Definition of pedestrian and forklift areas • Securing of overhead cranes and zones • Definition of areas for semi-trailer docks • TEC cooling • Microprocessor control Delta Lasers Technology Ltd

Technical specifications Wavelength (nm) Laser power (mW) Laser class Technology Operating temperature Storage temperature Cooling Expected lifetime (MTTF) Input voltage Input current Temperature protection Fuse Connection Power cable length 90 – 265 VAC, 50/60 Hz 1.8A/115V, 1A/230V Yes 2А at 230V (5х20mm) Metal gland 5m/10m/15m/20m (on request) Optical specifications Projection lens Focus Line thickness DOE projection Angle 30 °, 45 °, 60 °, 90 °, 110 ° (on request) manual (on request) 10 ~ 70mm Circle, Cross, Grating, Square (on request) Mechanical specifications Dimensions (mm) Safety ring...

Projection angle and line length LINE LENGTH Depending on the particular use case, modules with different beam angles can be selected, which generates the length of the laser line. The larger the beam angle, the longer the line will be. Angle: Distance Line length approx. 45° 5m 4.25m 60° 5m 5.80m 90° 5m 10m 110° 5m 15m Delta Lasers Technology Ltd.

Dimensions(mm) Delta FM Laser Delta Lasers Technology Ltd.

User manual Attention: This product guide contains important information for the safe installation and use of this product. Please, read and follow these instructions carefully. Keep this manual in a safe place for future reference. Safety warning: Class IIIR Laser Product - Avoid direct prolonged eye exposure (do not stare directly at the beam). Nominal distance for eye safety - 2 meters (take care when installing at close distances). When unpacking and before discarding the carton packing, please check for any shipping damages before using the product. If there is any damage caused by transportation...

The present warranty conditions apply to defects that have occurred as a result of the normal operation process during the warranty period and do not in any way limit the applicable laws and other mandatory provisions in the Republic of Bulgaria. Delta Lasers Technology Ltd. undertakes at its own expense to remedy all manufacturing defects of the products sold by it, which occur during the warranty period. The warranty period starts from the date of sale and is indicated in the record of handover or the invoice. Repairs during the warranty period are made only after a copy of the record of handover...

Damage due to natural disasters, mechanical and electrical shocks, high-voltage electrical discharges in the environment (lightning), vibration, and others that would not occur during normal operation of the product. Malfunction or large fluctuations in the electrical or communication networks. When using unsuitable or non-standard voltage sources. When plugging in peripherals while powered on and when plugged into poor or non-grounded power sources. Corrections or changes to the invoice or the warranty card. In these cases, the product is repaired at the expense of the customer with his prior...