Catalog excerpts
Adjustable line length Green, Red or Blue color Powerful laser projector for the projection of road markings in the industry. Delta FM Series is a laser system for line projection with multifunctional industrial applications. It is easy to install and adjust, with the capability to adjust the length of the projection line and to adjust the line thickness in advance. The Delta FM Series is classified as a 3R laser class. It is ideal for industrial applications that require a sufficiently powerful laser to project bright lines over long distances. It is safe enough so special safety goggles are not needed. Delta Field Master Series is available in Green color 520-530nm, Red color 638nm, Blue color 445nm. • Laser power up to 1400mW • Protection rating IP65 • Installation in the open or inside building. • Solid enclosure • Bright and saturated line • Replacement of traditional zones or painted paths • Creation of lines in applications where tape or paint do not work (dusty, cold, dirty work areas) • Definition of pedestrian and forklift areas • Securing of overhead cranes and zones • Precise mount, rotatable at 360° • Definition of areas for semi-trailer docks • Temperature regulation of the fans • Active TEC cooling • Heating control • Microprocessor control Delta Lasers Technology
Open the catalog to page 1Technical specifications Wavelength (nm) Laser power (mW) Laser class Technology Operating temperature Storage temperature Cooling Expected lifetime (MTTF) Warranty Electrical specifications Input voltage Input current Input signal interlock Temperature protection Fuse Connection Power cable length Yes 2А at 230V Metal gland 5m/10m/15m/20m (on request) Optical specifications Projection lens Focus Line thickness DOE projection Angle 30 °, 45 °, 60 °, 90 °, 110 ° (on request) manual (on request) 10 ~ 70mm Circle, Cross, Grating, Square (on request) Mechanical specifications Dimensions (mm)...
Open the catalog to page 2Projection angle and line length LINE LENGTH Depending on the particular use case, modules with different beam angles can be selected, which generates the length of the laser line. The larger the beam angle, the longer the line will be. Angle: Distance Line length approx. 45° 5m 4.25m 60° 5m 5.80m 90° 5m 10m 110° 5m 15m Delta Lasers Technology Ltd.
Open the catalog to page 3Dimensions(mm) Delta FM Laser Delta Lasers Technology Ltd.
Open the catalog to page 4User manual Attention: This product guide contains important information for the safe installation and use of this product. Please, read and follow these instructions carefully. Keep this manual in a safe place for future reference. Safety warning: Class IIIR Laser Product - Avoid direct prolonged eye exposure (do not stare directly at the beam). Nominal distance for eye safety - 2 meters (take care when installing at close distances). When unpacking and before discarding the carton packing, please check for any shipping damages before using the product. If there is any damage caused by...
Open the catalog to page 5All Delta Lasers Technology Ltd catalogs and technical brochures
-
GS06E series
2 Pages
-
MDR-20 series
2 Pages
-
Delta V Series
3 Pages
-
Delta Laser Array - Red
2 Pages
-
Delta VX Series
6 Pages
-
Delta F Series
6 Pages
-
Delta FieldLAS datasheet
9 Pages
-
Delta VXS
3 Pages
-
Delta Max 24
2 Pages
-
Delta Logis 8
3 Pages
-
Delta Logis 3
3 Pages
-
Delta 6 IP65 series
4 Pages
-
Delta ClubStar 8-FB4
3 Pages
-
Delta 3 IP65-FB4
3 Pages
-
Delta Spectrum LAB
3 Pages
-
Delta ClubStar Series
4 Pages
-
Delta FM Laser
7 Pages