DM 400 The flow measurement system by DELTA CONTROL SERVICES Flow Measurement • Measurement via mass flow meter • Shutoff valve; Bypass valve (optional) • Pressure monitoring • A very compact set and simplified connections for use at manual and automatic machines • Calibration mode and correction of pressure • Recovery test (optional) Ranges of Pressures and Flow • Mechanical regulation: 140 mbar; 1bar; 2 bar and 4 bar. • Ranges of flow: 0-0, 5 l/min; 0, 1-1 l/min; 0,2-2 l/min ; 0,5-5 l/min ; 1-10 l/min ; 2-20 l/min ; 5-50 l/min ; 10-100 l/min ; 20-200 l/min ; 50-500 l/min Communication • RS232 output • Retrieves results on SD card (optional) • Ethernet RJ45 output for data recovery (optional) • Profibus output (optional) Units of Measurement • Litres per minute (l/min) • Litres per hour (l/h) • Cubic centimeters per minute (cm³/min) • Other on request Functions • Pneumatics outputs (Marking, Connector for cycle valve) • From 1 to 3 auxiliary 24V outputs • 32 programs available accessible from the front of the PLC (64 optional) DELTA CONTROL SERVICES DELTA CONTROL SERVICES ZA ”AuPardy” - -01480 FRANS --FRANCE / /Tél ::+33 (0)4 37 55 10 85 -- Fax :: +33 (0)4 74 09 55 89 Pardy” 01480 FRANS FRANCE Tél +33 (0)4 37 55 10 85 Fax +33 (0)4 74 09 55 89 ZA ”Au Email info@ Email : :info@ deltacontrol.fr--site internet ::www.deltacontrol.fr del

DM 400 The Flow measurement by DELTA CONTROL SERVICES Working principle Filling Stabilisation The part used for the test is put under pressure and the test pressure is monitored. Waiting time during which the pressure stabilises (bounce and thermic effects). Flow measurement and analysis of the result. The part is put under atmospheric pressure. Test pressure Pressure to which the tested part is submitted during the whole test period. Technical features Power supply 24 V DC - main power supply included. 5 bar min, 1bar > Test pressure Clean and dry air ( ISO 8573-1) Pressure Units mbar, (other...