DP600
2Pages

DP 600 Leak detection with temperature compensation by DELTA CONTROL SERVICES Leak Detection by drop in Pressure • Differential measurement (accuracy 0,1 Pa) • Relative measurement (accuracy: mbar) • 4 Tests modes: Leak Test, Flow Test, Big Leak Test and Big Flow Test • Temperature Compensation Function (infrared sensor) Range of Pressures • Electronic regulation (pre-filling function): -800 mbar ; 200 mbar ; 1 bar ; 2 bar et 5 bar. (9 bar optional) • Mechanical regulation: -950 mbar; 140 mbar; 1 bar; 2 bar and 4 bar. 7 and 10 bar optional Specificities • Reduced internal volume for greater speed and sensitivity of measurement • Simple connection for application on station manual, semi-automatic or automatic • Compact box for use on automatic machine Measurement Units • Pascal (Pa) • Pascal per second (Pa/s) • Cubic centimeters per minute (cm³/min) • Retrieving results on USB stick • Quick coupler on the front for leak master • Viewer mode on PC: Editing and creating program • Retrieving results via RJ45 port TCP / IP Server communication • 64 programs available accessible from the front of the PLC (64 optional) • Ethernet IP communication (optional) • Communication between module Wi-Fi and VNC viewer (optional) DELTA CONTROL SERVICES DELTA CONTROL SERVICES ZA ”Au Pardy” - 01480 FRANS - FRANCE // Tél :: +33 (0)4 37 55 10 85 -- Fax ::+33 (0)4 74 09 55 89 ZA ”Au Pardy” - 01480 FRANS - FRANCE Tél +33 (0)4 37 55 10 85 Fax +33 (0)4 74 09 55 89 Email :: info@deltacontrol.fr -- site internet :: www.deltacontrol.fr deltacontrol.

DP 600 Leak detection with temperature compensation by DELTA CONTROL SERVICES Working principle Waiting Calculation of the temperature compensation coefficient (if active function) The part used for the test is put under pressure and the test pressure is monitored. Waiting time during which the pressure stabilises (bounce and thermic effects). Pressure drop measurement (ΔP), processing of the result by integrating the temperature compensation coefficient. The part is put under atmospheric pressure. Test Dump Test pressure Pressure to which the tested part is submitted during the whole test...