DM 400E The Leak detection system by DELTA CONTROL SERVICES Leak Detection • Measurement via mass flow meter • Pressure monitoring Specificity • A very compact set and simplified connections for use at manual and automatic machines • Calibration mode and correction of pressure Range of Pressure and Flow • Electronical regulation : 1 bar ; 2 bar ; 5 bar ; 9 bar and 10 bar. • Mechanical regulation: 140 mbar; 1 bar; 2 bar; 4 bar; 8 bar and 10 bar. Units of Measurement • Cubic centimeters per minute (cm³/min) • Cubic centimeters per hour (cm3/hour) • Quick coupler on the front for leak master • Ethernet RJ45 output for data recovery (optional) • Pneumatics outputs (Marking, Connector for cycle valve) • Profibus output (optional) • From 1 to 2 auxiliary 24V outputs • 32 programs available accessible from the front of the PLC (64 optional) DELTA CONTROL SERVICES DELTA CONTROL SERVICES ZA ”AuPardy” - -01480 FRANS --FRANCE / /Tél ::+33 (0)4 37 55 10 85 -- Fax :: +33 (0)4 74 09 55 89 Pardy” 01480 FRANS FRANCE Tél +33 (0)4 37 55 10 85 Fax +33 (0)4 74 09 55 89 ZA ”Au Email info@ Email : :info@ deltacontrol.fr--site internet ::www.deltacontrol.fr deltacont

DM 400E The Leak detection system by DELTA CONTROL SERVICES Working principle Filling The part used for the test is put under pressure and the test pressure is monitored. Waiting time during which the pressure stabilises (bounce and thermic effects). Flow measurement and analysis of the result. The part is put under atmospheric pressure. Test pressure Pressure to which the tested part is submitted during the whole test period. Technical features Power supply 24 V DC - main power supply included. 5 bar min, 1bar > Test pressure Clean and dry air ( ISO 8573-1) Units of Measurement (cm³/min) ; (cm3/hour)...