Delphi Air Temperature Sensors Description Delphi's Air Temperature Sensors are continuous function devices that change resistance inversely to temperature. They measure engine intake air temperature in the manifold, intake air duct, and air cleaner. A signal is then sent to the powertrain control module. Two versions are available: Intake Air Temperature Sensor Manifold Air Temperature Sensor Delphi Air Temperature Sensors Benefits High-temperature thermoplastic shell for durability Patented, lightweight, and cost-effective pre-mold subassembly Design flexibility to match calibration criteria, meet mounting and packaging requirements, and integrate with systems Customized packaging of mounting features, sealing options, connection system, and resistance output Crimpless conductive path to the negative temperature coefficient thermistor and calibration certification for enhanced reliability and accuracy; also eliminates an electrical interface 100 percent resistance calibration verification helps ensure quality and reliability Delphi Corporation World Headquarters 5725 Delphi Drive Troy, Michigan 48098-2815 USA © Delphi Corporation. All Rights Reserved

Delphi Air Temperature Sensors Specifications for Manifold Air Temperature Sensor Thermal and Electrical Properties Typical voltage supply: 5 V DC Operating temperature: -40°C to +135°C Resistance at 25°C: 2795 ohms Thermal time constant: 60 seconds in dry air stream Accuracy (±°C) -40°C to +100°C: 0.56 to 0.77 Accuracy (±°C) +100°C to +150°C: 0.77 to 1.24 Mechanical Characteristics Sensor body material: PE 30% GF Hex size: 18.90 mm (3⁄4 in.) Thread size: 3⁄8 in. - 18 NPTF Thread sealant: Loctite (Loctite is a trademark of its respective owner.) Installation torque: 10.8-16.3 Nm, dynamic Overall...

Delphi Air Temperature Sensors Specifications for Intake Air Temperature Sensor Thermal and Electrical Properties Typical voltage supply: 5 V DC Operating temperature: -40°C to +135°C Resistance at 25°C: 2795 ohms Thermal time constant: <15 seconds in dry air stream Accuracy (±°C) -40°C to +100°C: 0.56 to 0.77 Accuracy (±°C) +100°C to +150°C: 0.77 to 1.24 Mechanical Characteristics Sensor body material: PBT 30% GF Installation: press fit into air duct Overall weight: 5.52 grams Color: black Suggested mating connector assembly: P⁄N 153359 Intake Air Temperature Sensor Note: All measurements are...