Water-cooled high power lamp DELOLUX 204 is an area lamp which enables curing of area adhesive layers in seconds by homogeneous exposure. DELOLUX 204 takes the concept of DELOLUX 203 (external cooling profile) a little further and fully integrates the water cooling into the lamp head. At the same time, it achieves the same intensity values as all A4 versions. Technical data Description High-intensity area lamp for evenly irradiated bonding areas Dimensions of lamp head Light exit area Wavelength / typical intensity Mixed-wavelength head 365 & 400 nm (A4): ≥ 1,200 mW/cm² (365) @ 2 mm ≥ 2,000 mW/cm² (400) @ 2 mm Cooling mechanism Integrated water cooling system Required cooling capacity Max. heat capacity: 880 W Min. water flow rate per head: 1.5 l/min DELOLUX pilot and optionally downstream PLC Product coompatibility DELOLUX pilot A series