LED Spot Lamp DELOLUX 50 series
12Pages

LED SPOT LAMPS DELOLUX 50 series

DELOLUX 50 LED spot lamps Precise adhesive curing in seconds Short cycle times and fast reproducible processes are decisive criteria in industrial series production. The UV spot lamps of the DELOLUX 50 series feature the latest LED technology. Ultra-high intensities of up to 18,000 mW / cm² ensure fast and reliable adhesive curing in fractions of a second. With their low current consumption and low maintenance requirements, the lamps contribute to costefficient production. Benefit from maximum flexibility for your process: Choose between five lamp heads for irradiated areas of sizes ranging...

Your benefits at a glance: ► Shortest cycle times thanks to highest intensities ► High process reliability thanks to homogeneity and stable intensities ► Long lamp head lifetime of > 20,000 hours

Overview Lamp heads and intensities Full-size images Light exit area Wavelength | Intensity | Working distance

DELOLUX pilot S4 Two base units for efficient control For reliable control and power supply of DELOLUX 50 spot lamps, you can choose between two powerful models: DELOLUX pilot S4i is designed for integration into PLCoperated process systems and impresses with its cost efficiency and very low volume. The DELOLUX pilot S4T model can also be operated by PLC while still allowing manual control via touch screen. In addition, it has its own integrated power supply and can therefore operate autonomously in laboratory or test environments. systems with limited installation space. Regardless of the...

Light exit area: Ø 8.6 mm Wavelength | Typical intensity | Working distance 365 nm | ≥ 18,000 mW / cm2 | 2 mm 400 nm | ≥ 15,000 mW / cm2 | 2 mm 460 nm | ≥ 14,000 mW / cm2 | 2 mm Cooling mechanism Passive cooling via heat sink in the lamp head. Article number Interchangeable lenses Distance, irradiated area, and intensity can be individually adjusted depending on the lens. For more information and selection options, see user manual. Lens Article number

Light exit area: Ø 11.5 mm Wavelength | Typical intensity | Working distance 365 nm | ≥ 3,500 mW / cm2 | 9 mm 400 nm | ≥ 7,000 mW / cm² | 9 mm Cooling mechanism Passive cooling via heat sink in the lamp head. Article number Interchangeable lenses Distance, irradiated area, and intensity can be individually adjusted depending on the lens. For more information and selection options, see user manual. Lens Article number The transparent “ONSERT” connecting elements are joined with adhesive and cured with

Light exit area: Ø 10 mm Wavelength | Typical intensity | Working distance 365 nm | ≥ 7,950 mW / cm2 | 10 mm 400 nm | ≥ 10,500 mW / cm2 | 10 mm Cooling mechanism Passive cooling via heat sink in the lamp head. Article number Interchangeable lenses Distance, irradiated area, and intensity can be individually adjusted depending on the lens. For more information and selection options, see user manual. Lens Article number When fixing the fillet of piezo drives for distance sensors, the optical system of DELOLUX 505 enables larger working distances while providing for high intensities and homoge

Light exit area: 7 mm × 2 mm Wavelength | Typical intensity | Working distance 365 nm | ≥ 1,350 mW / cm² | 6 mm Cooling mechanism Passive cooling via heat sink in the lamp head. Light exit area: 7 mm × 2 mm Wavelength | Typical intensity | Working distance 365 nm | ≥ 5,200 mW / cm² | 6 mm 400 nm | ≥ 7,500 mW / cm² | 6 mm Cooling mechanism Passive cooling via heat sink in the lamp head. Article number Article number Adhesive curing in a camera module. Depending on the working distance, installation space and intensity requirements, users can choose between DELOLUX 50

Light exit area: 10 mm × 3 mm Wavelength | Typical intensity | Working distance 365 nm | ≥ 1,000 mW / cm² | 15 mm 400 nm | ≥ 1,600 mW / cm² | 15 mm 460 nm | ≥ 1,300 mW / cm² | 15 mm 460 nm LP | ≥ 500 mW / cm² | 15 mm 30° Light is emitted at an angle of 30° Cooling mechanism Passive cooling via heat sink in the lamp head. Article number Light exit at a 30° angle simplifies the curing of bonding areas th

DELOLUXcontrol The DELOLUXcontrol measuring device can be used to detect changes in light intensity that may result from aging, contamination, or changed distances between the lamp heads. It can be equipped and operated with various detector heads. The EEPROM technology used eliminates the need for additional, regular calibration of the display units with the detector heads. This allows detector heads and display units to be replaced or expanded quickly and easily. Display unit Detector head Article DELOLUXcontrol DELOLUXcontrol RS232 DELOLUXcontrol 9 mm DELOLUXcontrol 1 mm without detector...

DELO Industrial Adhesives China | Germany HQ | France | Italy | Japan | Korea Malaysia | Singapore | Thailand | Czech Republic | USA The technical data is for informational purposes only. Specific values can be found in the user manual. It is the user’s responsibility to test the suitability of the device for the intended purpose by considering all specific requirements. If you need support in using the devices, please feel free to ask your contacts in our Engineering Department. © DELO – This brochure including any and all parts is protected by copyright. Any use that is not expressly...