LED LINE LAMP DELOLUX 301

LED line lamp DELOLUX 301 Highest power for narrow production lines With its compact dimensions, the DELOLUX 301 line lamp is ideal for highly-automated processes on small and narrow production lines. Thanks to its very high intensity of up to 30 W / cm², it not only enables maximum speeds for curing adhesives and other multi-functional polymers, but also allows large working distances of up to 100 mm from lamp to component, offering maximum flexibility for its integration into production systems. DELOLUX 301 can be operated as a single head or linked to form a larger unit. With the ability to...

Your benefits at a glance: 〉Shortest cycle times thanks to the highest intensities production line flexibility thanks to large working distances geometries through seamless arrays

DELOLUX 301 The lamp creates a linear irradiated area, available in wavelengths of 365 nm, 400 nm, or 460 nm, suitable for UV-curing as well as light-curing products. DELOLUX 301 is ideal for use in clean rooms and comes standard with water-cooling with optimized water flow. DELOLUX 301 Lamp head dimensions Light exit area Wavelength / typical intensity 365 nm: ≥ 13,500 mW / cm² @ 2 mm 400 nm: ≥ 22,500 mW / cm² @ 2 mm 460 nm: ≥ 18,000 mW / cm² @ 2 mm Weight Cooling mechanism Dimensions DELOLUX 301 heat sink water 1x1 – 0 type Material output Security Article numbers 280 g External cooling profile...

DELOLUX 301 with control unit DELOLUX pilot AxT DELOLUX pilot Ax For reliable control and power supply of these LED line lamps, you can choose between three powerful models: The two DELOLUX pilot Axi models are designed for integration into PLC-operated process systems and can supply up to two lamp heads independently of each other. The PROFINET device can also be used to send more detailed information to the higher-level PLC for quality assurance and process data acquisition. Thanks to the very fast reaction and response times, it is ideal for the Industrial Internet of Things. DELOLUX pilot...

Highest performance in practice With its high intensity curing of the adhesive takes place in seconds. And with this intensity being consistently distributed through all lamps, you can expect maximum process quality and reliability. Organic photovoltaic lamination Organic photovoltaics are very thin and extremely flexible, allowing them to be used on almost any surface. To ensure that solar cells stay functioning long-term, they are laminated with foil in a roll-to-roll process. These often-sensitive cells, comprised of organic materials and perovskite, are protected with an appropriate adhesive...

Detector head Detector head DELOLUXcontrol DELOLUXcontrol DELOLUXcontrol Detector head DELOLUXcontrol DELOLUXcontrol DELOLUXcontrol The DELOLUXcontrol measuring device can be used to The DELOLUXcontrol measuring device can be from aging, detect changes in light intensity that may resultused to detect changes in light intensity device can be used to The DELOLUXcontrol measuring that between the lamp heads. contamination, or changed distances may result from aging, contamination, in and operated with various from aging, detect changes or light intensity that betweendetector heads. It can be equippedchanged...

DELO Industrial Adhesives China | Germany HQ | France | Italy | Japan | Korea Malaysia | Singapore | Thailand | Czech Republic | USA The technical data is for informational purposes only. Specific values can be found in the user manual. It is the user’s responsibility to test the suitability of the device for the intended purpose by considering all specific requirements. If you need support in using the devices, please feel free to ask your contacts in our Engineering Department. © DELO – This brochure including any and all parts is protected by copyright. Any use that is not expressly permitted...