Adhesive curing with the DELOLUX 80 LED lamp

High-intensity DELOLUX 80 LED light source and DELO-UNIPRO control unit DELOLUX 80: Intensity, directly at chip: 365 nm: 75,000 mW / cm2 400 nm: 85,000 mW / cm2 460 nm: 54,000 mW / cm2 Short cycle times and fast, reliable series production processes are key criteria in industrial manufacturing. LED is today’s leading adhesives curing lamp technology, with definite advantages over classic discharge lamps. LEDs ensure a curing process that is optimally adapted to the adhesive used, and they have a significantly longer lifetime than discharge lamps. The lifetime of a conventional mercury discharge...

DELO supplies the most compact curing lamps on the market. Irradiated area [mm] Light intensity distribution in dependence of the distance between lamp head and bonding area High brightness Optimized emission spectra and very easy handling High degree of flexibility for integration into production systems The unique optical system and the complex technology behind it allowed DELO to perfectly adjust the LED light beams of DELOLUX 80 to a working distance of 15 to 25 mm. This has the effect of much higher energy yield and a light intensity that is unique in its homogeneity over the entire irradiated...

Constant temperature progression over the entire lifetime Immediately full and permanently stable light power DELOLUX 80 with Coldguide Conventional air-cooled LED module DELOLUX 80 with Coldguide Conventional air-cooled LED module Conventional air-cooled LED module: Constant temperature, and therefore constant intensity is reached only after several minutes. DELOLUX 80 with integrated Coldguide™ cooling circuit: Thanks to the innovative liquid cooling system, the temperature and intensity progressions reach a stable level already after 0.1 s. Liquid cooling Compact design for easy integration...

OPERATION BACK >STOP< #1 0.250s#2xxx . XXX ■ Full and stable light power directly after switched on ■ Homogeneous light power and temperature distribution of the entire irradiated area ■ Adhesive curing in just seconds Application-related benefits ■ Fast, reliable serial processes ■ Much higher energy efficiency than discharge lamps ■ Stable parameters over the time ■ 20 times longer lifetime can be achieved by LEDs ■ Low operating costs (lower power consumption, lower costs for maintenance and spare parts) Unique flexibility to install the lamp head in any position relative to the component...

Curing lamps for various photoinitiated-curing adhesives: DELOLUX 80 365 DELO PHOTOBOND Min. irradiation time [s] 1 Typical application Multi-purpose adhesive Multi-purpose adhesive; good for glass, metal, plastic Multi-purpose adhesive Multi-purpose adhesive Glass showcases, glass furniture, spot bonding Glass showcases, glass furniture, hinges DELO KATIOBOND Multi-purpose adhesive for glass, metal, plastic 2 Bonding, sealing Bonding, sealing Bonding, sealing Bonding, sealing Bonding, sealing Casting, coating Bonding, sealing Excellent adhesive – lamp combination Suitable adhesive – lamp combination...

Optimized for increased process reliability Easy control: Easy measurement: DELO-UNIPRO DELOLUXcontrol In order to be able to meet customer-specific demands, the control concept of DELOLUX 80 is modular. Up to four DELOLUX 80 lamps can be independently controlled with the external DELO-UNIPRO control unit. Irradiation time and intensity can be individually set for each lamp. In addition, the status of all monitored lamp functions is displayed on the DELO-UNIPRO control unit - or alternatively via PLC. The control unit is also available as the DELO-UNIPRO Light version which - as the name suggests...

DELO Industrial Adhesives Headquarters ► Germany • Windach / Munich . China • Shanghai Japan • Yokohama Malaysia • Kuala Lumpur Singapore South Korea • Seoul Taiwan • Taipei Thailand • Bangkok USA • Sudbury, MA www.DELO-adhesives.com The technical data are for informational purposes only. Specific values can be found in the user manual. It is the user’s responsibility to test the suitability of the device for the intended purpose by considering all specific requirements. If you need support in using the devices, please feel free to ask your contacts in our Engineering Department. © DELO - This...