C-2000 moisture meter cotton With the C-2000 moisture meter from Delmhorst, you can effectively measure moisture content, ensuring high-quality cotton every time. Cotton ginned at the appropriate level of moisture produces the longest and strongest fibers. The newly designed C-2000 utilizes the relationship between moisture content and electrical resistance to effectively measure the moisture content of cotton fibers. The C-2000 Delmhorst moisture meter including the functionally designed case with built-in handle puts controls at your fingertips. Bright, clear digital display Four separate scales for testing lint cotton, seed cotton, wool and viscose/rayon Audible, adjustable alarm alerts you when your pre-selected MC has been reached Averages up to 100 accumulated readings Built-in calibration check Moisture Range: 4%-16% on lint cotton; 6%-20% on seed cotton; 12%-30% on wool and 6%-25% on viscose/rayon Built-in connector accepts any Delmhorst electrode Rugged construction ensures years of reliable use Sturdy plastic carrying case MCS-COTTON This moisture content standard is great for verifying that your C-2000 cotton moisture meter is in calibration. Note that the 30-E/C long pin electrode is required to use the MCS-COTTON. With two electrical resistance values (6% and 12%) to test your meter against, you can be sure that your readings will stand up to the strictest standards of accuracy. The MCS-COTTON is also available with a letter of certification traceable to NIST. ArtTest B.V. Tradename Delmhorst Europe www.MoistureMetersDelmhorst.com Titaniumlaan 100 NL-5221 CK ’s-Hertogenbosch The Netherlands

C-2000 moisture meter cotton Available electrodes: 30-E/C Electrode with 2 long insulated pins of 24cm (9½") The long insulated pins are ideal for measuring the moisture content in bales. Thanks to the insulated pins, you measure inside the bale instead of measuring the surface moisture. 52-E/C Cup type electrode Benefits This cup is ideal for measuring the moisture content in lint or seed cotton. 830-T/C Electrode made of heavy duty steel, length 91cm (36") with T-handle. 37-E/C Electrode with 8 pins of 38mm (1½") with 2,5cm (1") penetration. Due to the heavy duty steel, it is possible to measure...