products brochure
8Pages

AZS EmbeddedDigital Drives Axes and Spindles Motors >

Z32 Embedded Dos unit witha Ethernet (TCP/IP) cable. The Is the console PC with the modernTouch Screen technology, that D.Electron suggests to be connected to the DoublePC > ETHERNET architecture, the real-time one (Z32Embedded), and the Front-End one (PCW/T) allows high performances in terms of speed and quality of machining; its high power allows (incontrast with what happens for theZ32WRT) to install every kind of software, including complex 3D CAM programming software, and to speed up editing of huge files. The Console PC can be connected to a local (LAN) network through an additional...

Peripheral unitsӔ are all the devices connected to the Z32 Central Unit with the serial optical-fibre Z-LinkӔ field-bus. Z-Link uses a D.Electron proprietarycommunication protocol with a baud rate of 4Mbit/s. With its data transmission speed and its transmission protocol efficiency , the Z-Link bus can manage agreat number of peripheral units. In addition to the PLC inputs and outputs, the synchronous protocol permits the transmission of critical signals like transducedpositions, and references for analogical drives. This optical-fibre link, immune to any electrical noise, conforms to the...

Arc Voltage Converter DE1133 The battery charger module D607,that shows form and dimensionssimilar to the PE2 modules, is a special optional component (not connected to the Z-link) thatperforms the function of chargingand keeping in charge a 12 Vdc lead-acid battery. This battery may be used to keep aliveӔ theincremental position measuringsystem also when machine is OFF. This eliminates the need for the time-consuming zero settings eachtime that a machine withincremental position measuringsystem is switched ON .The battery charger D607 protectsthe battery against dangerous deepdischarge....

The Z-STAR peripherals fit in the Z-BOX case that gives them mechanical and electrical (motherboard) support. The first board (CPS) in the box is for power supplyand communication interface. The Z-STARӔ serial protocol is D.Electron proprietary and shows a 16Mbit/transfer rate. Each Z-Box contains a maximum of 8 Z-STAR peripherals (not consideringthe power supply / interface board). The Z-STAR peripherals receive the signals of motor transducers and position transducers of the machine (ENC, ENC/S orENC/Q boards) and drive the power modules (PWM boards). A Z-STARӔ line can be connected only...

When using the SA 20/40/80 power modules it is always necessaryto use an external braking resistor. D.Electron provides two size of dissipating resistors, 1100W and 2200W in protected executionwith thermostat.These resistors discharges the DC Bus when the motors are braking converting the braking energy in heat. AN.CA. S.r.l. PONTE DELLOLIO PC Tel +39 0523 878855 www.ancasrl.com ASYS Automation System S.r.l. PIACENZATel +39 0523 713304 MODELOhmsW SA MODULE www.asys.it D755 331100SA20 CONNECTION D755/1 221100SA40/80 SEGNI Roma Tel +39 06 97040100 D756 122200SA40/80 connection1@virgilio.it...