UC

UC

Product catalog summary
Specifications
The document provides detailed specifications for spray nozzles, including size, weight, and dimensions. The nozzles are available in sizes ranging from 2 inches to 4 inches, with corresponding weights and dimensions listed in a table format.

Spray Characteristics
The nozzles produce a hollow cone spray pattern with uniform distribution and a narrower droplet spectrum compared to solid cone sprays.

Construction and Materials
The nozzles are constructed from Silicon Carbide, Nitride bonded (SiC), featuring a clog-resistant design without internal vanes or cones. They utilize a 'Canted Bottom' design for maximum wear resistance, making them ideal for gas washing and cooling in high-temperature, corrosive, and abrasive environments. The nozzles are manufactured in a flanged version only, with mounting flanges conforming to ANSI 150 standards.

Capacity Chart
The document includes a capacity chart detailing the flow rates of various nozzle sizes (UC 60-FL to UC 600-FL) at different pressures (0.3 to 3.0 Bar.G.) and the nominal spray angle at 1 Bar.G.

Order Example
An example order is provided for a 3” UC 250-FL nozzle.

Special Purpose
The maximum recommended pressure for these nozzles is 7 Bar.G., and the maximum recommended temperature is 1650˚C.

Contact Information
For special requirements, contact details are provided: Tel: +44 (0) 151 424 6821, Fax: +44 (0) 151 495 1043, Email: [email protected], Web: www.delavan.co.uk.
See more

Catalog excerpts

UC-1

SPRAY CHARACTERISTICS q Produces a hollow cone spray pattern with uniform distribution. q Has a narrower droplet spectrum than equivalent solid cone sprays. Maximum Recommended Pressure: 7 Bar.G. Maximum Recommended Temperature: 1650˚C. CAPACITY CHART FLANGE SIZE (N.B.) NOZZLE NUMBER FLOW RATE IN LITRES/MINUTE AT Bar.G. 0,5 0,7 1,0 1,5 2,0 Nominal Spray Angle(°) at 1 Bar.G. SPECIAL PURPOSE q Manufactured in Silicon Carbide, Nitride bonded (SiC). q Clog resistant design with no internal vanes or cones. q Uses ‘Canted Bottom’ design of swirl chamber for maximum wear resistance. q Ideal for Gas washing and cooling where high temperatures, together with corrosive and abrasive elements, are present. q Manufactured in flanged version only. q Mounting flanges as per ANSI 150. Contact our Helpline for any special requirements: Tel: +44 (0) 151 424 6821 Fax: +44 (0) 151 495 1043 e-mail:[email protected] Web:www.delavan.co.uk

 Open the catalog to page 1
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.
About DirectIndustry
DirectIndustry is a marketplace that offers B2B players a complete experience, from product sourcing to purchase. DirectIndustry is an entity of VirtualExpo Group.