Spray Technologies SPRAY DRYING NOZZLE )ELAVAN SPRAY DRYING NOZZLES - TAKING OUR TECHNICAL LEADERSHIP ONE STEP FURTHEI FEATURES & BENEFITS Wear parts are positively retained during assembly Compatible with current SDX range New internal design reduces pressure loss through the Smaller and lighter compact design which is more durable, easy to clean and can be reapidly stripped down and reassembled No wrenches or tools are required to install the nozzle Minimal friction due to nozzle design permitting 10-20% lower operating pressure than conventional slotted distributor nozzle for equivalent atomisation quality Extended pump life due to lower operating pressure LEADING SIMPLEX NOZZLE, USING SWIRL CHAMBER FROM DELAVAN, *The nozzle produces a hollow cone spray pattern with uniform particle size distribution even at low operating pressure •Reduction in fine particles is possible due to lower pressure requirements * Flow rates are certified to be within +/-5% of rated capacity at 65 Bar.G and within +1-5% of rated spray angle when tested with water * Unique, patented single inlet spiral swirl chamber offers increased nozzle life, improved product uniformity, density or solubility 5 piece construction with 'O' ring seals Nozzle body and adaptors are available in 316 Stainless Steel Wear parts are in tungsten carbide O-rings are in Silicone or Viton O-ring seals allow assembly and disassembly without tools Please indicate all component parts and materials when ordering. Please see order sheet. OVERALL NOZZLE DIMENSIONS Contact our Helpline for any special requirements: Tel: +44 (0) 151 424 6821 Fax: +44 (0) 151 495 1043 'rvji e-mail: sales @delavan.co.uk Web: www.delavan.co.uk ffcs* or your local distributor

COMPONENT PARTS Standard Body Cone Faced Body Part Number 1/4" BSPT Standard Adaptor W19500-1 3/6" BSPT Standard Adaptor- W19500-2 1/2" BSPT Standard Adaptor" W19500-3 3/4" BSPT Standard Adaptor W19500-4 Retaining Disc Orifice 'O'Ring Orifice O'Ring Retaining Disc 'O' Ring Retaining Disc 'O' Ring Swirl Chamber Orifice Disc Removal Tool Tungsten Carbide * NPT and Buttweld available on request >Place the nozzle body thread side up on a flat >lnsert the orifice seal >Place the orifice disc inside the nozzle body with the "orifice rose" ie: the smallest diameter first inserted into the body orifice....