The following are various special bodies, adaptors and tools that are available for the SDX nozzle range. ASSEMBLY TOOLS CONE FACED BODIES Part number 36386 for changing Mini-SDX orifice discs. These are designed to prevent build up of sprayed product on the nozzle face and are available with cone angles of 70°, 80° and 90°. Special angles are available on request. Part number W15307 for insertion and removal of SDX and SDX III swirl chambers. CONE FACED BODY PART NUMBERS Nozzle Type There is an additional tool number W15336 which is designed for removal of orifice discs which have become embedded with product. The nozzle inlet can be provided with a butt-weld connection in place of the standard thread connection on request. The Kwik-Chek orifice gauges are designed for the rapid measurement of small hole diameters. Models are available to cover a range of hole diameters from 0,010” to 0,255” (0,25mm-6,50mm). These gauges work on the principle of directly transferring diameter measurements from a sliding, tapered needle to a linear scale readout graduated in 0,001” or 0,02mm. FEATURES q No skill required. Untrained personnel can make fast and accurate measurements. q Rapid and simple calibration. A setting master is provided with each gauge. Permits rapid periodic check on calibration and field readjustment, if necessary, by shop personnel. q Magnified, direct reading scale permits easy reading of hole diameters to nearest 0,001” or 0,02mm. q Precision ground tapered needle is made of 52-100 Steel and Chrome plated for maximum wear resistance. q Positive Clutch which locks needle and scale at exact dimension of hole being measured. q Convenient pocket size and weight makes these gauges ideal for roving inspectors and engineers. MULTIPLE NOZZLE ADAPTORS Delavan offers a line of multiple nozzle adaptors for use in applications that require three, four or five SDX nozzles. The multi adaptor or cluster body can be used for the SDX and SDXIII models. These have a 1” NPTF inlet with 3/8” NPTF outlets so that nipples can be fitted on to which the nozzles will be mounted. The part numbers are 50958-1 for the three nozzle adaptor, 50958-2 for the four nozzle adaptor and 50958-3 for the five nozzle adaptor. ORDER EXAMPLE Please specify the model number and Inch or Metric size when ordering. 95161-4 INDIVIDUAL GAUGES THREAD GUARDS Model Number These are designed to protect the threads and sealing surfaces during cleaning of the SDX bodies and SDX III adaptors. The part numbers are 50519 for the SDX and 50423 for the SDX III. Hole Size Range Inches Note:- Kwik-Chek orifice gauge is not suitable for Mini-SDX. Contact our Helpline for any special requirements: Tel: +44 (0) 151 424 6821 Fax: +44 (0) 151 495 1043 e-mail:[email protected] Web:www.delavan.co.uk Contact our Helpline for any special requirements: Tel: +44 (0) 151 424 6821 Fax: +44 (0) 151 495 1043 e-mail:[email protected] Web:www.delavan.co.uk