SPRAY CHARACTERISTICS q Produces a uniform flat fan shaped pattern. q Requires minimal overlapping to produce an even distribution when used in multiple nozzle system. q High pressure body design with replaceable insert. q A wide range of flow rates and spray angles. q 0° nozzle sizes available on request. q Orifice offset -5° to axis of dovetail. CONSTRUCTION AND MATERIALS Dovetail connection nozzle/body for positive alignment. 3 piece construction. Body, tip and cap. The tip is dovetailed for self alignment. The orifice insert is manufactured in Tungsten Carbide for maximum wear resistance at higher pressures. q The high pressure body, cap and orifice housing are manufactured in Stainless Steel as standard. q Standard Male and Female thread bodies are available and also an optional welding body. LQ 4 - 65° = Tip Only. 1⁄4” LQM (Male) 8 - 40° = Complete Assembly. LQW 2 - 65° = Welding Assembly. DIMENSIONS AND WEIGHTS Thread Size Assembly Type HIGH PRESSURE ORDER EXAMPLE LQ (WELDING) ASSEMBLY Maximum Recommended Pressure: 350 Bar.G. CAPACITY CHART Equiv. orifice size (mm) NOZZLE NUMBER FLOW RATE IN LITRES/MIN AT Bar.G. 70 100 140 210 280 Contact our Helpline for any special requirements: Tel: +44 (0) 151 424 6821 Fax: +44 (0) 151 495 1043 e-mail:[email protected] Web:www.delavan.co.uk