q O-ring sits on a special chamber to seal against leaking and for easy removal of cap for cleaning. q Body configuration turns the liquid flow, the strainer acts as a plumbing elbow and plugs less due to internal flow design. q Cap can be removed with the help of a slot in the cap. Use a screwdriver, etc. through the slot to loosen cap. CONSTRUCTION AND MATERIALS q Made of Nylon with Stainless Steel screens and Viton O-rings. q A new coarse buttress thread is featured on the cap for ease of installation and removal (two turns only). q Strainer 39908 weighs approx. 269g. q Strainer 39911 weighs approx. 666g. REPLACEMENT SEALS q 31352-226 for 39908 Strainers. q 31352-234 for 39911 Strainers. Y-LINE STRAINERS 39908 and 39911 Y-TYPE LINE STRAINER FEATURES CAPACITY CHART Screen Information PART NUMBER INLET/OUTLET THREAD SIZE NPTF PART NUMBER OF SCREEN MESH SIZE EFFECTIVE STRAINER AREA (cm2) Contact our Helpline for any special requirements: Tel: +44 (0) 151 424 6821 Fax: +44 (0) 151 495 1043 e-mail:[email protected] Web:www.delavan.co.uk * 20-mesh outer and 80-mesh inner screen.

q Low cost strainer that removes contaminants from the line. q Easily flushed by removing cap. CONSTRUCTION AND MATERIALS q Made of Glass-filled Polypropylene with Stainless Steel screens and EPDM seals. q Strainer 45946 weighs approx. 211g. q Strainer 45992 weighs approx. 666g. q 45992 should be used only as a suction strainer. REPLACEMENT SEALS q 45950 EPDM Seal for 45946. q 32627-237 EPDM O-ring for 45992. CAPACITY CHART Screen Information PART NUMBER OF SCREEN MESH SIZE EFFECTIVE STRAINER AREA (cm2) PART NUMBER INLET/OUTLET THREAD SIZE NPTF Y-LINE STRAINERS 45946 and 45992 Y-TYPE LINE STRAINER...