SPRAY CHARACTERISTICS q Produces highly uniform flat spray at high pressures. q Maximum impinging force is produced with a minimum loss of energy resulting in higher efficiency. q Spray pattern has knife-like cutting edge. q Normal spray angles of 25° and 32°. q Orifice insert is offset 15° to axis of dovetail. Dovetail connection nozzle/body for positive alignment. 3 piece design with Male NPT thread or Welding Nipple body, available in: Stainless Steel bodies and cap. Mild Steel (Welding Nipple body only.) Longer Welding Nipple bodies available to special order. Nozzle is Stainless Steel with Tungsten Carbide orifice insert. Tips, bodies and cap can be ordered separately in different materials. Threaded bodies are 3⁄4” or 1” Male NPT only. Other materials available to special order. ORDER EXAMPLE HIGH PRESSURE DQ 20-32° = Tip Only. 3⁄4” DQM 40-25° Stainless Steel = Complete Assembly. DQW 60-32° Stainless Steel = Welding Assembly. Note:- This nozzle type is also available as the DE type design with strainer and flow stabiliser. DIMENSIONS AND WEIGHTS Assembly Type Contact our Helpline for any special requirements: Tel: +44 (0) 151 424 6821 Fax: +44 (0) 151 495 1043 e-mail:[email protected] Web:www.delavan.co.uk Maximum Recommended Pressure: 275 Bar.G. CAPACITY CHART Nozzle Number