Delavan are pleased to offer thebrand new Swirl-Air The Delavan Swirl-Air > range of spray nozzles, based on aerospace technologyand developed within our Gas Turbine Division was designed to maximise hydraulic and pneumatic energy to atomize liquids at relatively low pressures. Originally designed for use in evaporative cooling, spray drying and combustion, they have since been used in many other industrial applications from Food to Steel production. Different spray angles are available; flow rates can be changed by adjusting air and liquid pressure and the degree of atomization controlled by changes in the air-to-liquid volume ratio. Two installation configurations are available. In the right angle nozzle, atomizing airenters the side and the liquid enters axially in the back. With the in-line nozzle, concentric piping is used with the liquid in the centre and atomising air entering around the outside. Concentric pipe adapter assemblies are optional and are not included with the nozzle assembly as standard. Through further engineering developments, > ή Lite nozzle assembly which incorporates a built in feedadaptor, thus removing the necessity for a separate body and adaptor you will find more details on this product on page 16.Our specialist design teams can also provide customised designs for your ownapplications, contact our sales team for more information. > Contact our Helpline or your local distributor for further information Tel: +44 (151) 424 6821 or inside USA Toll Free: 1-800 DelavanE-mail: [email protected] or [email protected] SWIRL-AIR ֮ PRODUCT BROCHURE INTRODUCTION 3 size="-3">