CIP2015

CIP2015

Product catalog summary
Spray Characteristics
  • The CIP15 nozzle provides a relatively uniform distribution at all pressures and is available in a range of flow capacities.
  • It is used where finer atomization than a single nozzle is required, with a normal spray angle of 230°.
  • For full 360° coverage, the assembly is identified with the suffix 'FC'.
Construction and Materials
  • The nozzle is manufactured with a 1½” BSPT Female threaded body fitted with 15 removable solid cone spray nozzles.
  • Standard materials include Stainless Steel and Gunmetal/Brass, with other materials available upon special order.
  • Non-standard spray patterns can be achieved by fitting different nozzles.
Order Example
  • Examples include 1½” CIP15-150 Stainless Steel and 1½” CIP15-150-FC P.T.F.E.
  • Contact information is provided for special requirements.
Performance Data
  • The document includes a capacity chart showing flow rates in liters per minute at various pressures for different assembly numbers and nozzle configurations.
  • Approximate diameter of coverage and maximum recommended pressure are specified, with metal assemblies rated up to 35 Bar.G. and plastic up to 7 Bar.G.
See more

Catalog excerpts

CIP2015-1

q Relatively uniform distribution at all pressures. q Available in a range of flow capacities. q The CIP15 is used in place of a standard full cone nozzle, where finer atomisation than a single nozzle might normally provide is required. q Normal spray angle is 230°. q For full 360° coverage with type CIP15 the assembly is identified with the suffix 'FC'. CONSTRUCTION AND MATERIALS q Manufactured with a 11⁄2” BSPT Female threaded body fitted with 15 removable solid cone spray nozzles. q Made in Stainless Steel, Gunmetal/Brass as standard. q Other nozzles can be fitted to give non-standard spray patterns. q Other material available to special order. ORDER EXAMPLE CIP 15 ASSEMBLY SPRAY CHARACTERISTICS APPROX. DIAMETER OF COVERAGE (mm) Assembly Numbers CIP 15-FC 100/190 CIP 15-FC 250/380 Maximum Recommended Pressure: 35 Bar.G. (Metal), 7 Bar.G. (Plastic). CAPACITY CHART FLOW RATE IN LITRES/MIN AT Bar.G. ASSEMBLY NUMBER

 Open the catalog to page 1
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.
About DirectIndustry
DirectIndustry is a marketplace that offers B2B players a complete experience, from product sourcing to purchase. DirectIndustry is an entity of VirtualExpo Group.