• The spray pattern is highly uniform and stable, featuring a knife-like cutting edge.
• It provides maximum impinging force with minimal energy loss, enhancing efficiency.
• No overlapping of spray patterns is required.
• Nominal spray angles are available at 25° and 32°.

• The nozzles are constructed from type 440 Hardened Stainless Steel.
• They feature a one-piece construction with a 3⁄8” Male NPT thread.

To order, use the nozzle number 343-15. For special requirements, contact the helpline at +44 (0) 151 424 6821 or email [email protected].

The capacity chart provides flow rates in litres per minute at various pressures for different nozzle numbers and spray angles. For example, nozzle 343-1 has a flow rate of 14.5 L/min at 40 Bar.G. and 25° spray angle.

• The nozzle dimensions are 31.8 mm (A), 17.5 mm (B), and 17.4 mm (C), with a weight of 35 grams.
• The maximum recommended pressure is 275 Bar.G.
• Nozzle coverage at 70 Bar.G. varies with height, ranging from 127 mm at 200 mm height to 324 mm at 600 mm height for a 25° spray angle.