Thermocouple Temperature Data Logger via WiFi RN400-T2TS •WiFi support b/g/n 2.4GHz •4 CH. Thermocouple Input •7 type T/C support for each CH. •RS485 MODBUS RTU Output •Cloud Storage / HTTP Output via Wifi •C Type Battery / DC 5~30V •OLED Display / micro SD / Backup FRAM RN400-T2TS is designed to measure 4Ch Thermocouple (K,J,T,N,S,E,B,R ) sensor signal and transfer them to the destination via WiFi connection. The destination would be an information system such as public cloud, local server and even PC. For high level security, it supports up to WPA2 Enterprise protocol. In addition to WiFi, RN400-T2PM can send the measured data to other traditional industrial devices such as PLC, industrial recorder and others through RS485 output. Premium RN400 T2 series have IP65 for protection, OLED screen for cold outdoor, F-RAM memory for instant backup and micro-SD card for CSV backup. 1. Micro SD Card slot 3. Battery Type Selection A : 1.5V x 2EA B : 3.6V x 1EA 4. Gasket 5. Open / Close Screw Hole Copyright ⓒ 2019 DEKIST Co.,Ltd All rights reserved 6. Terminal for DC power 7. Terminal for RS485

Thermocouple Temperature Data Logger via WiFi Communication Method •2.4GHz IEEE 802.11 b/g/n up to WPA2 Enterprise •HTTP Get/Post •RS485 MODBUS RTU ※RS485 need to use DC power adapter CH1 : T/C , CH2 : T/C , CH3 : T/C , CH4 : T/C ※Each channel can set as a different type. External Sensor Any thermocouple sensors (K,J,T,N,S,E,B,R) Supported Temp. Range Operating Condition Display Type (Color) OLED 20X2 CHAR (White) Sensing Interval Sending Interval •Big Data Analysis System •Remote Alert System •RN400-T2TS T/C Temperature Data logger •2 Type Cable Glands (PG-9 1EA/ PG11 1EA) ※10 Second Mode is...