2 Channels Gas Data Logger via WiFi RN400-T2GS •WiFi support b/g/n 2.4GHz •2 CH Gas Sensor •RS485 MODBUS RTU Output •Cloud Storage / HTTP Output via Wifi •C Type Battery / DC 5~30V •OLED Display / micro SD / Backup FRAM RN400-T2GS is designed to measure gases in the air and transfer them to the destination via WiFi connection. T2GS model could have up to two RG10 gas sensor that is a gas sensors such as NH3, H2S. The destination would be an information system such as public cloud, local server and even PC. For high level security, it supports up to WPA2 Enterprise protocol. In addition to WiFi, RN400-T2PM can send the measured data to other traditional industrial devices such as PLC, industrial recorder and others through RS485 output. Premium RN400 T2 series have IP65 for protection, OLED screen for cold outdoor, F-RAM memory for instant backup and micro-SD card for CSV backup. 2. Battery Type Selection A : 1.5V x 2EA B : 3.6V x 1EA 5. Terminal for DC Power 7.Terminal for Gas Sensor (2Channel) 6. Terminal for RS485

2 Channels Gas Data Logger via WiFi Communication Method •2.4GHz IEEE 802.11 b/g/n up to WPA2-Enterprise •HTTP Get/Post •RS485 MODBUS RTU ※RS485 need to use DC power adapter •Range : 0 -100 ppm (Electrochemical) •Temp Range : -10 ℃ ~ 40 ℃ (-50 ~ 104℉) RH Range : 15 % ~ 90% •Expected Life : two years in normal air T90 Response Time : 40 Sec •Repeatability : 3% of signal •Resolution : 1 ppm •Long term drift : 5% per 6 months •Filter : Sintering Metal Filter •Range : 0 - 50 ppm (Electrochemical) •Temp Range : -40 ℃ ~ 50 ℃ (-104 ~ 122℉) RH Range: 15 % ~ 90% •Expected Life : two years in normal air...