RADIONODE 4-20mA Datalogger via WiFi RN400-T2CS •WiFi support b/g/n 2.4GHz •4 Channel 4~20mA Input •Adjustable Scaler •High Accuracy (± 0.08% F.S.) •RS485 MODBUS RTU Output •Cloud Storage / HTTP Output via Wifi •C Type Battery / DC 5~30V •OLED Display / micro SD / Backup FRAM RN400-T2CS is designed to measure 4-20mA signal and transfer them to the destination via WiFi connection. The destination would be an information system such as public cloud, local server and even PC. For high level security, It supports up to WPA2-Enterprise protocol. In addition to WiFi, RN400-T2CS can send the measured data to other traditional industrial devices such as PLC, industrial recorder and others through RS485 output. Generally 4-20mA signal could be sent from sensor transmitter like pressure, PH, gases, temperature and etc. Premium RN400 T2 series have IP65 for protection, OLED screen for cold outdoor, F-RAM memory for 11 days instant backup and micro-SD card for CSV backup. 1. Micro SD Card slot 3. Battery Type Selection A : 1.5V x 2EA B : 3.6V x 1EA 4. Gasket 5. Open / Close Screw Hole Copyright ⓒ 2019 DEKIST Co.,Ltd All rights reserved 6. Terminal for DC power 7. Terminal for RS485

RADIONODE 4-20mA Datalogger via WiFi Communication Method • 2.4GHz IEEE 802.11 b/g/n up to WPA2 Enterprise • HTTP Get/Post •RS485 MODBUS RTU ※RS485 need to use DC power adapter •CH1 : 4-20mA / 0-20mA Analog In •CH2 : 4-20mA / 0-20mA Analog In •CH3 : 4-20mA / 0-20mA Analog In •CH4 : 4-20mA / 0-20mA Analog In ※Each channel can set as a different type. External Sensor Any Sensors that have 4-20mA output. Operating Condition OLED 20X2 CHAR (White) Sensing Interval Sending Interval •Centralized Monitoring System •Big Data Analysis System •Remote Alert System ※10 Second Mode is supported when customer...