Slewing rings with square sections without gear

Product catalog summary

1. Proprietary and Confidentiality Notice

The DUO-ROL-X slewing rings are patented products owned by ROLLIX-DEFONTAINE. All design plans and technical information are confidential and must not be shared or disclosed without explicit written permission. Recipients are required to maintain confidentiality and refrain from unauthorized use or dissemination.

2. Product Description and Variants

The document details multiple DUO-ROL-X crown variants, each identified by unique part numbers (e.g., 33-0411-01, 33-0541-01). Each variant includes comprehensive dimensional data such as mean diameter, pitch diameter, module (gear tooth size), number of teeth, pressure angle, tooth truncature, and profile displacement. Mounting features include specified mounting holes and grease holes with thread sizes (e.g., 4 x M8 x 1.00). The hardening status of each variant is indicated, distinguishing between hardened and non-hardened versions. Estimated weights are provided in kilograms and pounds where available.

3. Dimensional and Geometrical Specifications

Critical parameters for the DUO-ROL-X crowns include:

Mean diameter
Pitch diameter (diamètre primitif)
Module (gear tooth size)
Number of teeth
Pressure angle (typically 15°)
Truncature (tooth tip modification)
Profile displacement (addendum modification)

Runout on the pitch diameter is strictly controlled to ensure precision. General tolerances conform to IT-ETR-061 and ISO 8015 standards, ensuring dimensional accuracy and interchangeability.

4. Manufacturing and Assembly Notes

The document specifies approximate locations for filler plugs and hardening connections on the raceway. Mounting and grease holes are detailed for proper lubrication and assembly. Each drawing includes industrialization dates and verification signatures to track manufacturing status and quality control.

5. Language and Standards

Information is presented bilingually in French, English, and German to accommodate diverse users. The document references international standards IT-ETR-061 and ISO 8015 for general tolerances, ensuring compliance with recognized engineering practices.

6. Summary of Critical Parameters (Example Variant 33-0411-01)

Parameter	Value
Part Number	33-0411-01
Mean Diameter	411 mm
Pitch Diameter	460 mm
Module	14
Number of Teeth	46
Pressure Angle	15°
Mounting Holes	4 x M8 x 1.00
Estimated Weight	Not specified
Hardening	Hardened

Other variants follow similar detailed specifications with increasing diameters and weights.

7. Recommendations and Limitations

Strict confidentiality must be maintained regarding all design and manufacturing details.
Manufacturing tolerances must adhere to IT-ETR-061 and ISO 8015 standards to guarantee product quality and performance.
Proper lubrication via grease holes and correct mounting procedures are essential for reliable operation and longevity.

8. General Tolerances Overview

The document references general tolerance standards IT-ETR-061 and ISO 8015, which define acceptable dimensional and geometrical variations in engineering drawings. These standards ensure consistency, interchangeability, and quality control across manufacturing processes.

Abbreviations such as "bst.", "equid.", "equis.", and "gl. Abst." appear in the document, likely relating to specific tolerance or measurement methods, though exact definitions are not provided.

Conclusion

This technical document provides comprehensive specifications and manufacturing guidelines for the patented DUO-ROL-X slewing rings by GROUPE DEFONTAINE. It emphasizes the importance of confidentiality, precise dimensional control, adherence to international standards, and proper assembly practices to ensure optimal product performance and protection of proprietary technology.

Catalog excerpts

Slewing rings with square sections without gear-1

Implantation suivant A Diamètre moyen Tolérances générales suivant IT-ETR-061 et ISO 8015 General tolerances according to IT-ETR-061 and ISO 8015 Allgemeine toleranzen nach IT-ETR-061 und ISO 8015 Denture - Gear - Verzahnung Module Angle de pression Module - Modul Pressure angle Eingriffswinkel Diametral pitch Troncature Nbre de dents Truncature - Kopfkurzung Nr. of teeth - Zahnezahl Diamêtre primitif Pitch diameter - Teilkreissdurchmesser Déport 2 G m Add. mod. 2 Gm - Profilverschiebung 2 Gm Cote sur dents Measurement on teeth Zahnmessweite bei Zahnen Faux rond au diamêtre primitif - Run out on P.D. Rundlauffehler am Teilkreis Non trempée No hardened Ungehartet Trempée Hardened Gehartet Trous de fixation Mounting holes Befestigungsborungen Trous de fixation Mounting holes Befestigungsborungen Trous de graisseurs Grease holes Schmierborungen Trous de graisseurs Grease holes Schmierborungen Masse estimée Gewicht ca Estimated weight equid. equis. gl. Abst. equid. equis. gl. Abst. equid. equis. gl. Abst. equid. equis. gl. Abst. Position approximative du bouchon et du raccord de trempe Filler plug and hardening connection of raceway ca Stopfen - und heertteschlupf - position Cette couronne brevetée DUO-ROL-X est notre propriété. Ce plan ne peut être communiqué ni retransmis à des tiers sans l'autorisation écrite de ROLLIX-DEFONTAINE Information confidential proprietary of ROLLIX-DEFONTAINE. Any person excepted is required to accept same information in confidence and agrees to make no disclosures or use there of except as authorized by ROLLIX - DEFONTAINE Diese paterntierte drehverbindung DUOROL-X ist unser Eigentum. Diese zeiuchnung darf nicht ohne schriftliche genehmigung von ROLLIX-DEFONTAINE weitergegeben werden.

Open the catalog to page 1

Slewing rings with square sections without gear-2

Open the catalog to page 2

Slewing rings with square sections without gear-3

Tolérances générales suivant IT-ETR-061 et ISO 8015 General tolerances according to IT-ETR-061 and ISO 8015 Allgemeine toleranzen nach IT-ETR-061 und ISO 8015 Denture - Gear - Verzahnung Module Angle de pression Module - Modul Pressure angle Eingriffswinkel Diametral pitch Troncature Nbre de dents Truncature - Kopfkurzung Nr. of teeth - Zahnezahl Diamêtre primitif Pitch diameter - Teilkreissdurchmesser Déport 2 G m Add. mod. 2 Gm - Profilverschiebung 2 Gm Cote sur dents Measurement on teeth Zahnmessweite bei Zahnen Faux rond au diamêtre primitif - Run out on P.D. Rundlauffehler am Teilkreis Non...

Open the catalog to page 3

Slewing rings with square sections without gear-4

Implantation suivant A Implantation according to A Ansicht nach A 698 Tolérances générales suivant IT-ETR-061 et ISO 8015 General tolerances according to IT-ETR-061 and ISO 8015 Allgemeine toleranzen nach IT-ETR-061 und ISO 8015 Denture - Gear - Verzahnung Module Angle de pression Module - Modul Pressure angle Eingriffswinkel Diametral pitch Troncature Nbre de dents Truncature - Kopfkurzung Nr. of teeth - Zahnezahl Diamêtre primitif Pitch diameter - Teilkreissdurchmesser Déport 2 G m Add. mod. 2 Gm - Profilverschiebung 2 Gm Cote sur dents Measurement on teeth Zahnmessweite bei Zahnen Faux rond...

Open the catalog to page 4