Exhibit with us
*mydirectindustry  
English
  1. Catalogs
  2. DEFONTAINE - ROLLIX
  3. Precision roller slewing rings Compact Light with external gear

Precision roller slewing rings Compact Light with external gear

Precision roller slewing rings Compact Light with external gear
1 / 7 PagesView full catalog

Precision roller slewing rings Compact Light with external gear

Product catalog summary
Specifications:
The document provides detailed technical specifications for gear components, including mounting holes, grease holes, and gear denture specifications. Key elements include module, diametral pitch, number of teeth, pressure angle, truncature, pitch diameter, and addendum modification.

Procedures:
Measurement procedures are outlined for assessing teeth and run-out on pitch diameter, with distinctions made between hardened and non-hardened components.

Standards:
General tolerances are defined according to IT-ETR-061 and ISO 8015 standards.

Key Parameters:
- Module and diametral pitch are essential for gear design.
- The number of teeth and pressure angle significantly impact gear performance.
- Tolerances are vital for ensuring compatibility and performance in line with international standards.
See more

Catalog excerpts

Precision roller slewing rings Compact Light with external gear-1

Diamètre moyen Tolérances générales suivant IT-ETR-061 et ISO 8015 General tolerances according to IT-ETR-061 and ISO 8015 Allgemeine toleranzen nach IT-ETR-061 und ISO 8015 Denture - Gear - Verzahnung Angle de pression Module - Modul Pressure angle Eingriffswinkel Diametral pitch Troncature Nbre de dents Truncature - Kopfkurzung Nr. of teeth - Zahnezahl Diamêtre primitif Pitch diameter - Teilkreissdurchmesser Déport 2 G m Add. mod. 2 Gm - Profilverschiebung 2 Gm Cote sur dents Measurement on teeth Zahnmessweite bei Zahnen Faux rond au diamêtre primitif - Run out on P.D. Rundlauffehler am Teilkreis Non trempée No hardened Ungehartet Trempée Hardened Gehartet Trous de fixation Mounting holes Befestigungsborungen Trous de fixation Mounting holes Befestigungsborungen Trous de graisseurs Grease holes Schmierborungen Trous de graisseurs Grease holes Schmierborungen Masse estimée Gewicht ca Estimated weight equid. equis. gl. Abst. equid. equis. gl. Abst. equid. equis. gl. Abst. equid. equis. gl. Abst. Position approximative du bouchon et du raccord de trempe Filler plug and hardening connection of raceway ca Stopfen - und heertteschlupf - position Cette couronne brevetée DUO-ROL-X est notre propriété. Ce plan ne peut être communiqué ni retransmis à des tiers sans l'autorisation écrite de ROLLIX-DEFONTAINE Information confidential proprietary of ROLLIX-DEFONTAINE. Any person excepted is required to accept same information in confidence and agrees to make no disclosures or use there of except as authorized by ROLLIX - DEFONTAINE Diese paterntierte drehverbindung DUOROL-X ist unser Eigentum. Diese zeiuchnung darf nicht ohne schriftliche genehmigung von ROLLIX-DEFONTAINE weitergegeben werden.

 Open the catalog to page 1
Precision roller slewing rings Compact Light with external gear-2

Diamètre moyen Tolérances générales suivant IT-ETR-061 et ISO 8015 General tolerances according to IT-ETR-061 and ISO 8015 Allgemeine toleranzen nach IT-ETR-061 und ISO 8015 Denture - Gear - Verzahnung Angle de pression Module - Modul Pressure angle Eingriffswinkel Diametral pitch Troncature Nbre de dents Truncature - Kopfkurzung Nr. of teeth - Zahnezahl Diamêtre primitif Pitch diameter - Teilkreissdurchmesser Déport 2 G m Add. mod. 2 Gm - Profilverschiebung 2 Gm Cote sur dents Measurement on teeth Zahnmessweite bei Zahnen Faux rond au diamêtre primitif - Run out on P.D. Rundlauffehler am Teilkreis...

 Open the catalog to page 2
Precision roller slewing rings Compact Light with external gear-3

Diamètre moyen Tolérances générales suivant IT-ETR-061 et ISO 8015 General tolerances according to IT-ETR-061 and ISO 8015 Allgemeine toleranzen nach IT-ETR-061 und ISO 8015 Denture - Gear - Verzahnung Angle de pression Module - Modul Pressure angle Eingriffswinkel Diametral pitch Troncature Nbre de dents Truncature - Kopfkurzung Nr. of teeth - Zahnezahl Diamêtre primitif Pitch diameter - Teilkreissdurchmesser Déport 2 G m Add. mod. 2 Gm - Profilverschiebung 2 Gm Cote sur dents Measurement on teeth Zahnmessweite bei Zahnen Faux rond au diamêtre primitif - Run out on P.D. Rundlauffehler am Teilkreis...

 Open the catalog to page 3
Precision roller slewing rings Compact Light with external gear-4

Diamètre moyen Tolérances générales suivant IT-ETR-061 et ISO 8015 General tolerances according to IT-ETR-061 and ISO 8015 Allgemeine toleranzen nach IT-ETR-061 und ISO 8015 Denture - Gear - Verzahnung Angle de pression Module - Modul Pressure angle Eingriffswinkel Diametral pitch Troncature Nbre de dents Truncature - Kopfkurzung Nr. of teeth - Zahnezahl Diamêtre primitif Pitch diameter - Teilkreissdurchmesser Déport 2 G m Add. mod. 2 Gm - Profilverschiebung 2 Gm Cote sur dents Measurement on teeth Zahnmessweite bei Zahnen Faux rond au diamêtre primitif - Run out on P.D. Rundlauffehler am Teilkreis...

 Open the catalog to page 4
Precision roller slewing rings Compact Light with external gear-5

Diamètre moyen Tolérances générales suivant IT-ETR-061 et ISO 8015 General tolerances according to IT-ETR-061 and ISO 8015 Allgemeine toleranzen nach IT-ETR-061 und ISO 8015 Denture - Gear - Verzahnung Angle de pression Module - Modul Pressure angle Eingriffswinkel Diametral pitch Troncature Nbre de dents Truncature - Kopfkurzung Nr. of teeth - Zahnezahl Diamêtre primitif Pitch diameter - Teilkreissdurchmesser Déport 2 G m Add. mod. 2 Gm - Profilverschiebung 2 Gm Cote sur dents Measurement on teeth Zahnmessweite bei Zahnen Faux rond au diamêtre primitif - Run out on P.D. Rundlauffehler am Teilkreis...

 Open the catalog to page 5
Precision roller slewing rings Compact Light with external gear-6

Diamètre moyen Tolérances générales suivant IT-ETR-061 et ISO 8015 General tolerances according to IT-ETR-061 and ISO 8015 Allgemeine toleranzen nach IT-ETR-061 und ISO 8015 Denture - Gear - Verzahnung Angle de pression Module - Modul Pressure angle Eingriffswinkel Diametral pitch Troncature Nbre de dents Truncature - Kopfkurzung Nr. of teeth - Zahnezahl Diamêtre primitif Pitch diameter - Teilkreissdurchmesser Déport 2 G m Add. mod. 2 Gm - Profilverschiebung 2 Gm Cote sur dents Measurement on teeth Zahnmessweite bei Zahnen Faux rond au diamêtre primitif - Run out on P.D. Rundlauffehler am Teilkreis...

 Open the catalog to page 6
Precision roller slewing rings Compact Light with external gear-7

Diamètre moyen Tolérances générales suivant IT-ETR-061 et ISO 8015 General tolerances according to IT-ETR-061 and ISO 8015 Allgemeine toleranzen nach IT-ETR-061 und ISO 8015 Denture - Gear - Verzahnung Angle de pression Module - Modul Pressure angle Eingriffswinkel Diametral pitch Troncature Nbre de dents Truncature - Kopfkurzung Nr. of teeth - Zahnezahl Diamêtre primitif Pitch diameter - Teilkreissdurchmesser Déport 2 G m Add. mod. 2 Gm - Profilverschiebung 2 Gm Cote sur dents Measurement on teeth Zahnmessweite bei Zahnen Faux rond au diamêtre primitif - Run out on P.D. Rundlauffehler am Teilkreis...

 Open the catalog to page 7

All DEFONTAINE - ROLLIX catalogs and technical brochures

  1. Specific slewing rings Heavy Duty-Radial without gear
    Specific slewing rings Heavy Duty-Radial without gear

    7  Pages

  2. Specific slewing rings Heavy Duty-Radial with internal gear
    Specific slewing rings Heavy Duty-Radial with internal gear

    8  Pages

  3. Specific slewing rings Double Row-Speed without gear
    Specific slewing rings Double Row-Speed without gear

    4  Pages

  4. Specific slewing rings Double Row-Speed with internal gear
    Specific slewing rings Double Row-Speed with internal gear

    4  Pages

  5. Precision roller slewing rings RT without gear
    Precision roller slewing rings RT without gear

    10  Pages

  6. Precision roller slewing rings Compact without gear
    Precision roller slewing rings Compact without gear

    25  Pages

  7. Precision roller slewing rings Compact Light without gear
    Precision roller slewing rings Compact Light without gear

    7  Pages

  8. Precision roller slewing rings Compact Light with internal gear
    Precision roller slewing rings Compact Light with internal gear

    7  Pages

  9. Standard crossed rollers Double row slewing rings without gear
    Standard crossed rollers Double row slewing rings without gear

    5  Pages

  10. Standard crossed rollers Double row slewing rings with internal gear
    Standard crossed rollers Double row slewing rings with internal gear

    5  Pages

  11. Standard crossed rollers Double row slewing rings with external gear
    Standard crossed rollers Double row slewing rings with external gear

    5  Pages

  12. Standard crossed rollers Single row slewing rings without gear
    Standard crossed rollers Single row slewing rings without gear

    23  Pages

  13. Standard crossed rollers Single row slewing rings with internal gear
    Standard crossed rollers Single row slewing rings with internal gear

    20  Pages

  14. Standard crossed rollers Single row slewing rings with external gear
    Standard crossed rollers Single row slewing rings with external gear

    23  Pages

  15. L-shaped profile slewing rings without gear
    L-shaped profile slewing rings without gear

    7  Pages

  16. L-shaped profile slewing rings with internal gear
    L-shaped profile slewing rings with internal gear

    7  Pages

  17. L-shaped profile slewing rings with external gear
    L-shaped profile slewing rings with external gear

    7  Pages

  18. Slewing rings with square sections with external gear
    Slewing rings with square sections with external gear

    7  Pages

  19. Slewing rings with square sections with internal gear
    Slewing rings with square sections with internal gear

    7  Pages

  20. Slewing rings with square sections without gear
    Slewing rings with square sections without gear

    7  Pages

  21. Standard single row ball slewing rings with internal gear
    Standard single row ball slewing rings with internal gear

    20  Pages

  22. Standard single row ball slewing rings with internal gear thin sections
    Standard single row ball slewing rings with internal gear thin sections

    9  Pages

  23. Standard single row ball slewing rings without gear
    Standard single row ball slewing rings without gear

    21  Pages

  24. Standard single row ball slewing rings without gear thin sections
    Standard single row ball slewing rings without gear thin sections

    8  Pages

  25. Standard double row ball slewing rings with external gear
    Standard double row ball slewing rings with external gear

    5  Pages

  26. Standard double row ball slewing rings with internal gear
    Standard double row ball slewing rings with internal gear

    5  Pages

  27. Standard double row ball slewing rings without gear
    Standard double row ball slewing rings without gear

    5  Pages

  28. Standard single row ball slewing rings with external gear
    Standard single row ball slewing rings with external gear

    22  Pages

  29. Rollix Spares & Services
    Rollix Spares & Services

    8  Pages

  30. Rollix Precision range brochure
    Rollix Precision range brochure

    7  Pages

  31. Rollix slewing rings catalogue English version
    Rollix slewing rings catalogue English version

    144  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.