ORDERING GUIDE Manual Models with protective case Automatic Models with protective case1 Typical Application Higher bond strength coatings on metals Lower bond strength coatings on wood, concrete, and plastic Cementitious adhesive for tiles Concrete surfaces and overlays Included Dollies 50 x 50 mm Plate (qty 4) with threaded post Steel Ø50 mm (qty 4) with > 25 mm thickness Steel Cutting Tool 50 mm diamond grit hole saw with arbor 1. Upgrade to the Pelican Case by adding a ‘-P’ to the Ordering Code. 2. Kits include everything needed to convert the adhesion tester to a different model. 3. 50 mm Conversion Kit includes Qty. 12 Ø50 mm dollies. 4. ASTM C1583 specifies an ASTM C881 Type IV, Grade 3 epoxy. While the included ResinLab epoxy is suitable for many applications, it does not meet this specific requirement. Options Conversion Kits Convert your adhesion tester to a different model with our choice of Conversion Kits. Choose from 20 mm, 50 mm, 50 x 50 mm Tile, and 50 mm C1583 kits. Kits include the appropriate stand-off, holesaw (if applicable), and test dollies. Dollies Select from 10 mm, 14 mm, 20 mm, 50 mm, 50 mm C1583, and 50 x 50 mm tile dollies available in assorted quantities. Multipacks offer larger quantities at a reduced cost. Pelican CasesTM (CASEATAB-P) Heavy-duty, waterproof cases complete with custom foam insert to securely hold your instrument. (Automatic models only) Glue Kit (ATADHESIVEKIT) Additional glue, mixing sticks, palettes, and cotton swabs PosiTest AT Verifier (ATVERIFY) Ideal for checking the accuracy and operation of PosiTest Adhesion Testers and is an important component in fulfilling both ISO and in-house quality control requirements. Available in Automatic or Manual models Adhesion testers include everything needed for testing: Adhesion Tester, built-in rechargeable NiMH battery with charger (AT-A only), 3 AAA batteries (ATM only), dollies, abrasive pad, cutting tool, glue with mixing sticks and palettes, cotton swabs, USB cable, PosiSoft Software, instruction booklet, shoulder strap (AT-A only), Certificate of Calibration traceable to NIST, two-year warranty, and sturdy, lightweight carrying case Conforms to international standards including ASTM C1583/D4541/D7234, ISO 4624/16276-1, EN 1542/12004-2, AS/NZS 1580.408.5, and others © DeFelsko Corporation USA 2022. All Rights Reserved. Technical Data subject to change without notice. • Printed in USA • PDAT.v.LW/ W2208 DeFelsko Corporation • 800 Proctor Ave. • Ogdensburg, New York 13669-2205 USA Toll Free 1-800-448-3835 • Tel: +1-31

Select Manual or Automatic... Measures the force required to pull a specified test diameter of coatings or material away from its substrate using hydraulic pressure Portable—requires no external power source—ideal for field or lab use Pull Rate Indicator allows the operator to easily monitor and adjust the rate of pull in accordance with international test methods Easily select dolly sizes, change measurement units, or store readings with the touch of a button Conversion charts not required—tester automatically calculates pressure based on dolly or plate size Inexpensive, single-use dollies and...

Select Manual or Automatic... Measures the force required to pull a specified test diameter of coatings or material away from its substrate using hydraulic pressure Portable—requires no external power source—ideal for field or lab use Pull Rate Indicator allows the operator to easily monitor and adjust the rate of pull in accordance with international test methods Easily select dolly sizes, change measurement units, or store readings with the touch of a button Conversion charts not required—tester automatically calculates pressure based on dolly or plate size Inexpensive, single-use dollies and...

ORDERING GUIDE Manual Models with protective case Automatic Models with protective case1 Typical Application Higher bond strength coatings on metals Lower bond strength coatings on wood, concrete, and plastic Cementitious adhesive for tiles Concrete surfaces and overlays Included Dollies 50 x 50 mm Plate (qty 4) with threaded post Steel Ø50 mm (qty 4) with > 25 mm thickness Steel Cutting Tool 50 mm diamond grit hole saw with arbor 1. Upgrade to the Pelican Case by adding a ‘-P’ to the Ordering Code. 2. Kits include everything needed to convert the adhesion tester to a different model. 3. 50 mm...