RASHORT-CLASS EXCAVATORS

ZAXIS | DASH-5 ultrASHort-ClASS EXCAVAtorS Engine Manufacturer and Model Yanmar 4TNV98C Non-Road Emission Standard EPA Final Tier 4/EU Stage IV Net Power (ISO 9249) 42.4 kW (56.9 hp) @ 2,000 rpm Cylinders 4 Displacement 3.3L (202 cu. in.) Aspiration Natural Off-Level Capacity 70% (35 deg.) Cooling Variable-speed fan; viscous clutch Powertrain 2-speed propel with automatic shift Maximum Travel Speed Low 3.1 km/h (1.9 mph) High 5.0 km/h (3.1 mph) Drawbar Pull 6650 kgf (14,661 lb.) Hydraulics Open Center, Load Sensing Main Pumps 3 variable-displacement axial-piston pumps Maximum Pump Flow 2 x 72...

Undercarriage Rollers (each side) Carrier 1 Track 5 Shoes (each side) 40 Track Adjustment Hydraulic Chain Sealed and lubricated Swing Mechanism Swing Speed 10.5 rpm Swing Torque 16 600 Nm (12,244 lb.-ft.) Ground Pressure 450-mm (18 in.) Rubber Crawler Pads 39 kPa (5.6 psi) 450-mm (18 in.) Continuous Rubber Belt 39 kPa (5.6 psi) 450-mm (18 in.) Triple Semi-Grouser Shoes 38 kPa (5.4 psi) 600-mm (24 in.) Triple Semi-Grouser Shoes 27 kPa (3.9 psi) Serviceability Refill Capacities Fuel Tank 135L (35.7 gal.) Cooling System 9.7L (2.6 gal.) Engine Oil with Filter 12.3L (3.2 gal.) Hydraulic Tank 56L (15...

ZAXIS | DASH-5 ultrASHort-clASS EXcAVAtorS Arm Digging Force (ISO) Bucket Digging Force (ISO) A Maximum Reach A1 Maximum Reach at Ground Level B Maximum Digging Depth B1 Maximum Digging Depth at 2.44-m (8 ft.) Flat Bottom C Maximum Cutting Height D Maximum Dumping Height E Minimum Swing Radius F Maximum Vertical Wall G Tail Swing Radius Operating Dimensions Machine Dimensions A Overall Length B Overall Height C Undercarriage Width With 450-mm (18 in.) Shoes With 600-mm (24 in.) Shoes D Rear-End Length/Swing Radius E Distance Between Idler/Sprocket Centerline F Undercarriage Length G Counterweight...

ZAXIS | DASH-5 ultrASHort-clASS EXcAVAtorS Buckets A full line of buckets is offered to meet a wide variety of applications. Replaceable cutting edges are available through Hitachi Parts. Optional side cutters add 150 mm (6 in.) to bucket widths. Arm Dig Force (ISO) Arm Dig Force (ISO) Type Bucket Bucket Width Bucket Capacity Bucket Weight Bucket Dig Force (ISO) 1.62 m (5 ft. 4 in.) 2.12 m (6 ft. 11 in.) Bucket Tip Radius 3 mm in. m cu. yd. kg lb. kN lb. kN lb. kN lb. mm in. Heavy Duty 610 24 0.24 0.31 268 591 44 9,892 34 7,545 29 6,524 883 34.76 Heavy Duty 762 30 0.31 0.41 313 691 44 9,892 34...

Engine Auto-idle system Batteries (2 – 12 volt) Coolant recovery tank Single-element air filter Electronic engine control Enclosed fan guard (conforms to SAE J1308) Engine coolant to –37 deg. C (–34 deg. F) Fuel filter with water separator Full-flow oil filter Radiator and oil cooler with dust-protective net Glow-plug start aid 500-hour engine oil-change interval 70% (35 deg.) off-level capacity Isolation mounted Hydraulic System Reduced-drift valve for boom down, arm in Auxiliary hydraulic valve section Spring-applied, hydraulically released automatic swing brake Auxiliary hydraulic-flow adjustments...

Hitachi Construction and Mining Products 1515 5th Avenue • Moline, IL 61265