ZAXIS | DASH-5 utIlIty-ClASS EXCAVAtORS

ZAXIS | DASH-5 utIlIty-ClASS EXCAVAtORS Engine ZX250LC-5 Manufacturer and Model Isuzu 4HKIZXSA-01 Non-Road Emissions Standards EPA Interim Tier 4/EU Stage IIIB Net Rated Power (ISO 9249) 140 kW (188 hp) at 2,100 rpm Cylinders 4 Displacement 5.2L (317 cu. in.) Off Level Capacity 70% (35 deg.) Aspiration Turbocharged, air-to-air charge-air cooler Cooling Direct-driven, high-efficiency, low-noise, suction-type fan Powertrain 2-speed propel with automatic shift Maximum Travel Speed Low 3.3 km/h (2.1 mph) High 5.5 km/h (3.4 mph) Drawbar Pull 22 650 kg (49,935 lb.) Hydraulics Open center, load sensing...

Refill Capacities Engine Oil with Filter 26L (6.9 gal.) Operating Weights With full fuel tank; 79-kg (175 lb.) operator; 1.06 and 800-mm (32 in.) triple semi-grouser shoes Operating Weight Optional Components Undercarriage w/Triple Semi-Grouser Shoes One-Piece Boom (with arm cylinder) 2210 kg (4,872 lb.) Arm with Bucket Cylinder and Linkage Boom Lift Cylinders (2) Total Weight 434 kg (958 lb.) Operating Dimensions Bucket Digging Force A1 Maximum Reach at Ground Level 10.11 m (33 ft. 2 in.) B Maximum Digging Depth 6.96 m (22 ft. 10 in.) B Maximum Digging Depth at C Maximum Cutting Height 10.16...

JTY-CLASS EXCAVATORS C Rear-End Length/Swing Radius 3.14 m (10 ft. 4 in.) D Distance Between Idler/Sprocket Centerline 3.84 m (12 ft. 7 in.) I Track Width w/Triple Semi-Grouser Shoes 700 mm (28 in.) L Overall Width w/Triple Semi-Grouser Shoes

ZAXIS | DASH-5 utIlIty-ClASS EXCAVAtORS Buckets A full line of buckets is offered to meet a wide variety of applications. Digging forces are with power boost. Buckets are equipped with ESCO teeth standard. Replaceable cutting edges and a variety of teeth are available through Hitachi parts. Optional side cutters add 150 mm (6 in.) to bucket widths. Capacities are SAE heaped ratings. Arm Dig Force Arm Dig Force Type Bucket Bucket Width Bucket Capacity Bucket Weight Bucket Dig Force 2.96 m (9 ft. 9 in.) 3.61 m (11 ft. 10 in.) 3 mm in. m cu. yd. kg lb. kN lb. kN lb. kN lb. Heavy Duty 1067 42 1.06...

Engine Auto-idle system Batteries (2 – 12 volt) Coolant recovery tank Dual-element dry-type air filter Electronic engine control Enclosed fan guard (conforms to SAE J1308) Engine coolant to –37 deg. C (–34 deg. F) Programmable auto shutdown Fuel filter with water separator Full-flow oil filter Turbocharger with charge air cooler High-efficiency, low-noise fan Glow-plug start aid 500-hour engine-oil-change interval 70% (35 deg.) off-level capability Severe-duty fuel filter Chrome exhaust stack Engine coolant heater Hydraulic System Reduced-drift valve for boom down, arm in Auxiliary hydraulic...

Hitachi Construction and Mining Products 1515 5th Avenue • Moline, IL 61265