ZX210F-3
28Pages

Catalog excerpts

ZAXIS | DASH-3 Foresters Road Builder Processor Live Heel Fixed Heel Butt & Top Power Clam Models

EXTREME Productivity. tough machines for tough jobs. Hitachi has been in the woods helping loggers for decades. And our tough Zaxis Dash-3 Foresters are equipped to stand the test of time. Swing torque. Tractive effort. Horsepower. Hydraulic flow. Next-sizeup components. New stronger structures. Improved machine protection. Seamless integration of attachment and carrier with installation of Waratah processing heads and a variety of makes and models for grapples. Add it all up, and you get efficient, reliable and durable Foresters to take on the wildest of woods. moving ahead, never behind....

Open the catalog to page 2

n Improved Component Protection. Three-piece heavy-duty engine enclosure, new under-house protection system, new hydraulic filter guard and muffler protection, and heavier right rear door all work to keep the machine’s valuable components safe from damage. n Durable Undercarriage. Robust structures; next-size-up components and drive systems; and heavy-duty track chains deliver on both productivity and durability. n Robust Upper Frame. Strong boom-tower arrangement, thick base plates, after-welding machining in critical areas, and large-diameter swing bearings make these machines extremely...

Open the catalog to page 3

ROAD BUILDER Engine ZX210F-3 Manufacturer and Model Isuzu AI-4HK1X Non-Road Emissions Standards Certified to EPA Tier-3 emissions Net Rated Power (ISO 9249) 164 kW (122 hp) @ 2,000 rpm Cylinders 4 Displacement 5.1 L (317 cu. in.) Off-Level Capacity 70% (35 deg.) Aspiration Turbocharged, air-to-air charge-air cooler Cooling Direct drive with mechanically reversing option, high efficiency, low noise, suction type Engine Coolant Rating -37 °C (-34 °F) Powertrain 2-speed propel with automatic shift Maximum Travel Speed Low 3.2 km/h (2.0 mph) High 5.1 km/h (3.2 mph) Controls Pilot levers,...

Open the catalog to page 4

ROAD BUILDER Upperstructure ZX210F-3 Counterweight, Standard 4000 kg (8,818 lb.) Ground Pressure 700-mm (28 in.) Double-Grouser Shoes 47 kPa (6.85 psi) Swing Mechanism Swing Speed 12.6 rpm Swing Torque 74 606 Nm (54,857 lb.-ft.) Serviceability Side by side coolers with external debris protection, Centralized Lube Banks, and “O” Ring Face Seal Connectors on most hydraulic hoses, Diagnostics Machine Information Center (MIC), Computerized In-Cab Monitor Information, and Fluid Sampling Ports. Fluid Change Interval Engine Oil 500 hours Hydraulic Oil 5,000 hours Filters Vertically mounted...

Open the catalog to page 5

Operating Weights lb.) Bucket and 700-mm (28 in.) Double-Grouser Shoes. Operating Dimensions Heavy Duty Bucket w/Power Boost 102 kN (22,9241b.) Bucket Digging Force w/ 1065-mm (42 in.) 0.91-m3 (1.19 cu. yd.) Heavy Duty Bucket Lifting Capacity Over Front at Ground Level 6.1 m (20 ft.) Reach with Power Boost, with attachment 6469 kg (14,248 lb.) A1 Maximum Reach at Ground Level 9.64 m (31 ft. 8 in.) B Maximum Digging Depth at 2.44-m (8 ft.) Flat Bottom 5.97 m (19 ft. 6 in.) D Maximum Dumping Height 7.72 m (25 ft. 4 in.) E Minimum Swing Radius 3.04 m (9 ft. II in.) F Maximum Vertical Wall 5.36...

Open the catalog to page 6

Machine Dimensions C Rear-End Length/Swing Radius 3.10 m (10 ft. 2 in.) D Distance Between Idler/Sprocket Centerline 3.66 m (12 ft.) G Maximum Shipping Width 3.36 m (II ft.); 3.49 m (II ft. 6 in.) I Track Width w/Double-Grouser Shoes 700 mm (28 in.) Lift Charts Boldface type indicates hydraulically limited capacity; lightfacetype indicates stability-limited capacities, in kg (lb.). Ratings at bucket lift hook; machine equipped with standard gauge and situated on firm, uniform supporting surface. Total load includes weight of cables, hook, etc. Figures do not exceed 87 percent of hydraulic...

Open the catalog to page 7

PROCESSOR Engine ZX210F-3 Manufacturer and Model Isuzu AI-4HK1X Non-Road Emissions Standards Certified to EPA Tier-3 emissions Net Rated Power (ISO 9249) 164 kW (122 hp) @ 2,000 rpm Cylinders 4 Displacement 5.1 L (317 cu. in.) Off-Level Capacity 70% (35 deg.) Aspiration Turbocharged, air-to-air charge-air cooler Cooling Direct drive with mechanically reversing option, high efficiency, low noise, suction type Engine Coolant Rating -37 °C (-34 °F) Powertrain 2-speed propel with automatic shift Maximum Travel Speed Low 3.2 km/h (2.0 mph) High 5.1 km/h (3.2 mph) Controls Pilot levers,...

Open the catalog to page 8

PROCESSOR Upperstructure ZX210F-3 Counterweight, Standard 4000 kg (8,818 lb.) Ground Pressure 700-mm (28 in.) Double-Grouser Shoes 49 kPa (7.16 psi) Swing Mechanism Swing Speed 12.6 rpm Swing Torque 74 606 Nm (54,857 lb.-ft.) Serviceability Side by side coolers with external debris protection, Centralized Lube Banks, and “O” Ring Face Seal Connectors on most hydraulic hoses, Diagnostics Machine Information Center (MIC), Computerized In-Cab Monitor Information, and Fluid Sampling Ports. Fluid Change Interval Engine Oil 500 hours Hydraulic Oil 5,000 hours Filters Vertically mounted...

Open the catalog to page 9

Operating Weights ZX2I0F-3 ^^^^^H With 840-kg (18181b.) Full Fuel Tank: 79-kg (175 lb.) Operator; 4000-kg (8.818 lb.) Counterweight; 2120-kg (4,673 lb.) Processor and 700-mm (28 in.) Double-Grouser Shoes Operating Dimensions Lifting Capacity Over Front at Ground Level 6.1 m (20 ft.) Reach with Power Boost, with attachment 5806 kg (12,800 lb.) A1 Maximum Reach at Ground Level 8.51 m (27 ft. II in.) D Maximum Level Log Height 7.36 m (24 ft. 2 in.) E Minimum Swing Radius 3.10 m (10 ft. 2 in.)

Open the catalog to page 10

C Rear-End Length/Swing Radius 3.10 m (10 ft. 2 in.) D Distance Between Idler/Sprocket Centerline 3.66 m (12 ft.) G Maximum Shipping Width 3.36 m (II ft.); 3.49 m (II ft. 6 in.) I Track Width w/Double-Grouser Shoes 700 mm (28 in.) Lift Charts Boldface type indicates hydraulically limited capacity; lightfacetype indicates stability-limited capacities, in kg (lb.). Ratings at bucket lift hook; machine equipped with standard gauge and situated on firm, uniform supporting surface. Total load includes weight of cables, hook, etc. Figures do not exceed 87 percent of hydraulic capacities or 75...

Open the catalog to page 11