UTILITY-CLASS EXCAVATORS

ZAXIS | DASH-6 UTILITY-CLASS EXCAVATORS POWERFUL PERFORMANCE. PROVEN PRODUCTIVITY. BUILT-IN BENEFITS. Built with the same toughness as our large mining excavators, Hitachi utility-class excavators bring efficiency, reliability and durability to your job sites. The ZX210-6 and ZX210LC-6 are no exceptions. These models feature a number of productivity-boosting advantages, like a fuel-efficient EPA Final Tier 4 (FT4)/EU Stage IV Isuzu engine that meets rigid emission standards. The best part? There’s no diesel particulate filter (DPF) needed. You also get standard upperstructure handrails for added...

ZAXIS | DASH-6 UTILITY-CLASS EXCAVATORS

TACKLE TOUGH JOBS WITH CONFIDENCE. PRODUCTIVITY ON A HIGHER LEVEL. The ZX210-6 and ZX210LC-6 take productivity to a higher level with a HIOS III hydraulic system, which balances engine performance with hydraulic flow. The hydraulic boost system and enhanced boom recirculation generate aggressive boom and arm speed – returning the arm to dig faster, so you can move more dirt in a day. These models provide efficient performance with three work modes. High Productivity (HP) delivers more power and faster hydraulic response. Power (P) delivers a balance of power and speed, plus fuel economy for normal...

UTILITY-CLASS EXCAVATORS COMFORTABLE OPERATORS ARE MORE PRODUCTIVE OPERATORS.COMFORTABLE AND SAFE CAB. The ZX2I0-6 and ZX2I0LC-6 keep operators comfortable and focused on the job. Silicone-filled cab mounts provide isolation from noise and vibration. A refined, multifunction LCD monitor features a rotary control for easy access to performance and convenience functions and features Operators will also appreciate the wide entryway, fully adjustable high-back sculpted seat, storage space and generous legroom. Unsurpassed visibility, ergonomically placed low-effort joysticks and a highly efficient HVAC...

■ Automatic, high-velocity bi-level climate-control system with automotive-style adjustable louvers helps keep the glass clear, the cab comfortable and the operator productive. ■ Operators get maximum support from a sculpted mechanical suspension high-back seat. For even more comfort, opt for the air-suspension heated seat.

ZAXIS | DASH-6 UTILITY-CLASS EXCAVATORS EFFICIENT n Auto-idle, which reduces engine speed when hydraulics aren’t in use, and auto-shutdown contribute to fuel efficiency. n The FT4 engine solution does not require a DPF, saving service time and lowering operating costs. n A battery disconnect switch, located in the rear door behind the cab, is easily accessible and extends battery life.

MINIMIZE MAINTENANCE. MAXIMIZE UPTIME. SIMPLE SERVICING. Maintenance is minimized with the ZX210-6 and ZX210LC-6 — from grouped service points to at-a-glance gauges. No diesel particulate filter (DPF) is needed with the FT4 engine solution. Convenient upperstructure handrails provide easy engine access. Extended service intervals help maximize uptime. Scheduled maintenance is easy to track using ZXLinkTM and the in-cab diagnostic monitor. These models are easy to maintain so you have… LOWER OPERATING COSTS. n Easy-to-navigate LCD monitor tracks various fluid levels and issues scheduled maintenance...

UTILITY-CLASS EXCAVATORS TOUGHNESS BUILT-IN, DOWNTIME TOSSED OUT.DEPENDABLE DURABILITY. Tough jobs are no match for the ZX2I0-6 and ZX2I0LC-6. They’re protected by a heavy-duty undercarriage and durable D-channel side frames. Added strength comes from welded bulkheads within the boom that resist torsional stress, tungsten-carbide thermal-coated arm surfaces and oil-impregnated bushings. The boom, arm and mainframe are so tough, they re warranted for three years or 10,000 hours, whichever comes first. Add it all up, and these models give you... ■ Reinforced D-channel side frames provide maximum...

n Dust screen prevents plugging, providing increased reliability. n With large idlers, rollers and strutted track links, the sealed and lubricated undercarriage is built for the long haul. n Oil-impregnated bushings enhance durability and extend lube intervals.

Manufacturer and Model Isuzu 4HKI Guides Center Center Chain Sealed and lubricated Sealed and lubricated

SPECS Ground Pressure ZX210-6 ZX210LC-6 600-mm (24 in.) Triple Semi-Grouser Shoes 37.3 kPa (5.41 psi) 34.0 kPa (4.93 psi) 700-mm (28 in.) Triple Semi-Grouser Shoes 42.0 kPa (6.09 psi) 38.9 kPa (5.64 psi) 800-mm (32 in.) Triple Semi-Grouser Shoes 48.2 kPa (6.99 psi) 43.9 kPa (6.37 psi) Swing Mechanism Speed 13.3 rpm Torque 68 900 Nm (50,662 lb.-ft.) Serviceability Refill Capacities   Fuel Tank 403 L (106 gal.)   Diesel Exhaust Fluid (DEF) Tank 57 L (15 gal.)   Cooling System 28 L (30 qt.)   Engine Oil with Filter 23 L (24 qt.)   Hydraulic Tank 135 L (36 gal.)   Hydraulic System 240 L (63 gal.)...

Operating Dimensions Arm Length   Arm Digging Force   SAE   ISO   Bucket Digging Force   SAE   ISO A Maximum Reach A1 Maximum Reach at Ground Level B Maximum Digging Depth B1 Maximum Digging Depth at 2.44-m (8 ft.) Flat Bottom C Maximum Cutting Height D Maximum Dumping Height E Minimum Swing Radius F Maximum Vertical Wall ZAXIS | DASH-6 UTILITY-CLASS EXCAVATORS

SPECS Machine Dimensions A Overall Length 2.42-m (7 ft. 11 in.) arm 2.91-m (9 ft. 7 in.) arm B Overall Height 2.42-m (7 ft. 11 in.) arm 2.91-m (9 ft. 7 in.) arm C Rear-End Length/Swing Radius D Distance Between Idler/Sprocket Centerline E Undercarriage Length F Counterweight Clearance G Upperstructure Width H Cab Height I Track Width w/ Triple Semi-Grouser Shoes J Gauge Width K Ground Clearance L Overall Width with Triple Semi-Grouser Shoes 600 mm (24 in.) 2.82 m (9 ft. 3 in.) 700 mm (28 in.) 2.92 m (9 ft. 7 in.) 800 mm (32 in.) 3.02 m (9 ft. 11 in.)

Lift Charts ZX2I0-6 Boldface type indicates hydraulically limited capacity; lightface type indicates stability-limited capacities, in kg (lb.). All lift capacities are based on ISO 10567 (with power boost). Ratings at bucket lift hook; machine equipped with standard counterweight and standard gauge; and situated on firm, uniform supporting surface. Total load includes weight of cables, hook, etc. Figures do not exceed 87 percent of hydraulic capacities or 75 percent of weight needed to tip machine. Load Point Height 1.5 m (5 ft.) 3.0 m (10 ft.) 4.5 m (15 ft.) 6.0 m (20 ft.) 7.5...